What aspects should I start with when purchasing an electric hydraulic pallet truck?

The purchase of electric hydraulic pallet truck should start from the following aspects:

Actual load of electric hydraulic pallet truck

Electric hydraulic pallet truck There are different tonnages, ranging from 1 ton to 3.5 tons. When choosing a stacker electric pallet truck, users must first know the weight of the goods they want to carry, and then choose an electric hydraulic pallet truck accordingly. For example: if your cargo weighs 2.0 tons, then you definitely can’t afford a 1.6-ton or 1.8-ton stacking electric pallet truck; buying a 3-ton pallet truck is a waste, after all, a 3-ton electric hydraulic pallet truck and 2 The price difference between ton pallet trucks and electric pallet trucks is still quite large.

Supporting rack height

In order to standardize management and save land, most users use racks to store raw materials, which involves the lifting height of electric hydraulic pallet trucks. The maximum height of the fork electric pallet lift truck of the electric pallet jack must be able to meet the requirements of unloading and shoveling on the shelf. However, some people have different criteria for calculating the pallet jack height for an electro-hydraulic pallet jack. Some people calculate the pallet jack height from the upper surface of the electric pallet jack forks, while others calculate the pallet jack height from the lower surface of the electric hydraulic pallet jack forks. This is likely to cause the purchased electric hydraulic pallet truck to be unusable because the height of the rack does not match the lifting height of the stacker electric pallet truck. Of course, if there are no shelves and the raw materials are placed on the ground, there is no need to consider this problem.

The width of the right-angle aisle between the warehouse shelves

Simply put, it is the width of the safe aisle that the stacker can turn 90 degrees in the aisle. The placement of most warehouse shelves is carefully calculated to maximize the number of shelves and fit more goods in a limited space. This involves electro-hydraulic pallet jacks that turn at right angles between racks. The right-angle stacking aisle width of the stacker electric pallet truck is calculated according to the vehicle design parameters: Right-angle stacking aisle width u003d turning radius + front overhang + fork/pallet length + safety clearance (safety clearance) about 20 cm in front and rear). For these parameters, the user does not need to be too realistic. Each electric hydraulic pallet jack will provide its own right angle stacking aisle width, as long as the user knows that the width between their racks is less than the right angle stacking aisle width of the stacking electric pallet jack.

Pallet size used with electric hydraulic pallet trucks

This is especially important for users who already use a lot of pallets. The size of the pallet will also affect the selection of an electro-hydraulic pallet jack. For different pallets, the corresponding stacking electric pallet truck should be selected. For example, for a pallet of 1200*1000mm (length*width), an electro-hydraulic pallet truck with a fork load center at the corresponding tonnage of 600mm should be selected. Otherwise, it would be a shame to eliminate a large number of pallets due to the stacking of electric pallet jacks.

There are other things we need to pay attention to when purchasing an electric hydraulic pallet truck. For example, the height of the warehouse door and the height of the container should be higher than the height of the stacker electric pallet truck; when purchasing an electric hydraulic pallet truck, it is also necessary to consider whether an additional power distribution battery is required; the stacker electric pallet truck is in The problem of the rated load loss after the goods are lifted to a certain height, that is, the load curve; special industries, such as the extremely low temperature of the cold storage, will have higher requirements on the electric hydraulic pallet truck; if the truck is operated on the floor, it must be considered per square meter How much weight can the meter floor carry; also need to consider a road surface problem, the customer's road surface is uneven, there is a slope, and the wheels and motor of the electric pallet truck are very worn.

Ningbo Staxx Material Handling Equipment Co.,Ltd. is a company that offers a wide selection of . OEM and ODM services are also available to users. To know more, go to Staxx Pallet Truck.
Satisfying our customers with the appropriate level of quality is a primary goal and a fundamental element as pallet stacker truck of our business mission.
There's the area of manufacturing pallet stacker truck that's becoming very important. If you can create those things, you build this closed bond.