loading

Staxx Pallet Truck is a professional warehouse equipment manufacturer and pallet jack supplier in China.

What is the difference between fork leg stacker and counterbalanced stacker?

by:Staxx Pallet Truck     2021-11-16
Advantages of fork-leg stacker: 1. It can increase the stability of the body. In professional terms, it increases the wheelbase of the front and rear wheels, making the vehicle more safe and stable when moving forward and backward. 2. It can effectively reduce the weight of the car body; because if the legless design is adopted, the lever principle must be used. If the carrying capacity of the rated size cargo with a load of 1.5 tons is required, the weight of the vehicle must also be at least 1.5T or more In order to electric pallet lift truck the corresponding goods; but the fork-leg design can well make up for the shortcomings caused by the principle of leverage. The fulcrum is ingeniously extended forward through the form of supporting legs for a greater distance, then its load capacity and the body itself The weight can easily exceed the ratio of 1:1; for example, a cargo with a load of 1.5 tons does not require the body to be bulky to 1.5 tons. Maybe the body weight is half of its own weight, which is 750kg. Can lift 1.5 tons of cargo. It can be seen that the design of the fork-leg stacker has greatly improved the traditional lever principle. 3. It can effectively shorten the size of the stacker, making it compact and powerful! Because the supporting legs are used and the fulcrum is moved forward, only some equipment necessary for the entire vehicle is needed to the rear without adding additional counterweights, so the length of the vehicle body can be effectively reduced. Disadvantages of fork-leg stackers: 1. There are more restrictions on the scope of use: it is not suitable for high-gradient environments. Generally speaking, the climbing degree cannot exceed 7°, otherwise there is a danger of the chassis being stranded. It is not suitable for shelves and stacking places where the forks cannot be accessed at the bottom. 2. There are higher requirements for the pallets that are used together: pallets can be roughly divided into single-sided and double-sided; single-sided pallets mean that the upper panel is used to store goods, and the support column or support stall below the panel, and then the next On the ground, single-sided pallets can also be called single-layer pallets. Double-sided pallets are also called double-layer pallets, that is, on the basis of single-sided pallets, there is a panel under the support column, and then the panel is on the ground. In other words, the double-sided pallet has two layers of panels, and it can be used in many cases. Yes; but single-sided pallets can only be used with the panel facing up. Fork-leg stackers can only be used with single-sided pallets, because the support feet and forks are synchronized into the gap of the pallet, and then the fork lifts the pallet, and the support feet are left intact to support the whole vehicle and the goods. the weight of! Therefore, if it is used with a double-sided pallet, it will cause two undesirable results: 1. The fork and the support leg cannot enter the pallet space; 2. The fork and the support leg enter the pallet space synchronously, but the fork lifts the upper panel of the pallet and the support leg during lifting. Still pressing the lower panel to cause damage to the pallet or damage to the stacker or intact! 3. There are certain requirements for the height of the pallet. Generally speaking, when the fork of a fork-leg stacker is placed at the lowest point (that is, the fork is directly placed on the support leg), the minimum height is generally 85mm or 90mm; then match The clearance height of the used pallet must exceed the minimum height of the fork before it can be used. Compared with fork-leg stackers, legless counterbalanced stackers also have many advantages and disadvantages: legless counterbalance stackers have advantages: a wide range of applications and a certain degree of climbing degree compared with fork-leg stackers. The lowest point of the fork can reach 50mm or even lower, and single and double sided pallets can be easily used. It can be easily adapted to any stacking requirement. Disadvantages of the legless counterbalanced stacker: the use of counterweights makes the body relatively heavy, the body is longer and inconvenient to use in a narrower space, it is not very convenient to use, the weight and size are inconvenient to enter elevators and other places, and the price is more expensive.
Looking for a producer to fix your pallet stacker truck problems? Then contact the pallet stacker truck experts at Ningbo Staxx Material Handling Equipment Co.,Ltd., offering a wide range of products across the global market. Visit Staxx Pallet Stackers to find our best offer!
Ningbo Staxx Material Handling Equipment Co.,Ltd. provides various models for the +pallet +jack +supplier, as this being the most beneficiary equipment in powered pallet truck. Extra features of hand pallet jack pallet stacker truck make it an perfect tool in the battery operated pallet stacker aspect. Visit Staxx Pallet Stackers for the professional assistance by the experts.
Deeper connections between Ningbo Staxx Material Handling Equipment Co.,Ltd. and customers can be made when we're thinking out of the box and meeting outside of manufacturing work.
Custom message
暂无友情链接数据
Chat Online 编辑模式下无法使用
Leave Your Message inputting...