What routine checks should be done before operating a semi-electric stacker?

In addition to regular inspections, semi-electric stackers should have a habitual safety inspection before operation.

First, the driver is seated and his seat belt is fastened. Press the horn to confirm that there is no problem; check the power supply display to ensure that the power is sufficient; push the fork electric pallet lift truck lever to check whether the fork electric pallet lift truck is normal; check the service brake system, and work only when the brake is in good condition.

The brake detection is the most important in the above routine detection before driving. The main points of brake detection are:

When the operating lever is moved up to the highest position or down When moving to the lowest position, the stacker is prohibited from walking to avoid overturning. When the direction switch is turned to the reverse position during normal operation, the electric braking function can be performed. Controlling the running speed can control the size of the motor power.

Steering detection of pallet trucks: Detect whether the turning angle of pallet trucks is sensitive during steering operation. Whether it can be turned at any position within a range of 90° in the left and right directions.

The above is the pre-operation inspection, so what are the normative behaviors after using the pallet truck?

Generally, the manufacturer of electric pallet trucks will advise customers that the parking operation is as follows after use:

Press the fork lowering lever to lower the fork Lower to the lowest position, so that there is no system pressure in the hydraulic system; release the operating arm, the operating arm will automatically return to the parking brake position, turn the key switch to OFF.

Pay attention to the power display of the electric stacker during use to prevent the stacker from being too low due to excessive use. Usually, the semi-electric stacker can be charged when the remaining 20% u200bu200bof the power is lost.

After get off work, the stacker should be inspected again to confirm that there is no problem and will not affect the next use. After the inspection, the semi-electric stacker should be parked at the location of the fixed equipment, and the vehicle body should be kept in good condition. clean.

Staxx Pallet Truck allocates customer service resources to the platform where their customers are most vocal.
We are dedicated to providing you with more than just customer service by utilizing our qualified team who pride themselves on meeting and exceeding customer's needs. We also have ell-equipped plantin China with advanced facilities to manufacture staxx pallet truck pallet stacker truck products according to customers requirements. Welcome to send your enquiry and visit our factory. Our website is Staxx Pallet Truck.
Ningbo Staxx Material Handling Equipment Co.,Ltd. can assure you that we never compromise on our quality standards and are one of the best in the market at present.