When does the clutch plate of an electro-hydraulic pallet jack need to be replaced?

We know that there are many important parts of electric hydraulic pallet trucks, and the clutch is one of them. Its good or bad is closely related to the safety of the driver. The clutch is a very important part of the electro-hydraulic pallet truck, which is related to the safety of the driver. Usually people probably classify the clutch plate as a vulnerable part of the pallet truck. Should it be replaced frequently? But according to the prompt, this is not the case, the clutch plate is actually replaced only once a few years. Some customers and friends even use some pallet trucks in the process of using pallet trucks, and even use the clutch plate to get hot and wear to the point of burning. Some friends will ask when to change it? Some summaries are given below for your reference. If the following points appear, make a replacement judgment.

The traction force of the electric hydraulic pallet truck is obviously insufficient when climbing uphill, and it is very difficult to travel. And the higher the clutch is used, the more burning it will smell after driving for a while. In such a situation, we can consider that the clutch plate needs to be replaced.

In fact, it is suggested that you can check whether the clutch plate of the electric hydraulic pallet truck has problems in daily use. The electric hydraulic pallet truck will introduce a very simple detection method to you: the driver first hangs the 1st gear, then pulls the handbrake or brakes, and then starts. During this process, if the engine of the equipment does not turn off, then we can directly judge that the clutch plate needs to be replaced.

Hang on 1st gear to start, when the driver feels the clutch is uneven, the electric hydraulic pallet truck has a jerky feeling when pressing the plate, stepping on, and lifting the clutch, then the clutch of the pallet truck needs to be replaced. piece. If you can hear the sound of metal friction every time you electric pallet lift truck the clutch, it may be that the clutch plate has been severely worn, so the clutch plate should also be replaced.

In addition, we would like to remind everyone that the engine of the electric hydraulic pallet truck cannot support fast running. When the front gear or the second gear engine is driving at a low speed, suddenly step on the accelerator to the bottom. If you feel the speed rises significantly However, when the vehicle speed does not accelerate significantly, it means that the clutch of the equipment is slipping and the clutch plate needs to be replaced.

The above is how to judge the need to replace the clutch plate of the electric hydraulic pallet truck.

It is beyond doubt that benefits electric stacker. Market sentiments are strong, especially in the light of growing pallet trolley observed globally.
If you need pallet stacker truck solution, you should always consult a professional provider. Ningbo Staxx Material Handling Equipment Co.,Ltd. is one such a competent provider that is highly qualified to offer a wide range of products and services. Visit today!
Ningbo Staxx Material Handling Equipment Co.,Ltd. has never compromised on the quality and the services provided to the customer.