When to Replace Custom Electric Hydraulic Pallet Truck Forks

Custom electro-hydraulic pallet jack forks are a very important part of your handling equipment, and although everyone knows it, it is often overlooked. Custom believes that changing the forks at the right time enhances the safety of the equipment. But when do the forks need to be replaced? There are some obvious signs that it's time to change, but if these signs are obvious, it's time to act. So today we will talk about when we need a device to replace the fork.

When the thickness of the fork is reduced by more than 10%, the customization reminds everyone that the equipment fork needs to be replaced. Because when the thickness of the custom electric hydraulic pallet jack fork is reduced to more than 10%, the use of the fork outside the plateau may cause the equipment to be unable to electric pallet lift truck the weight of the goods that it can bear and cause accidents. It’s worth noting that this is especially dangerous in heavy lifting or rough terrain, so it’s imperative to monitor the thickness of the fork and take immediate action to replace it with a new fork if wear reaches the aforementioned point.

When the forks are no longer straight or aligned at the correct angle, the custom reminds everyone that it is time to replace the equipment custom electric hydraulic pallet truck forks. It is important to check the fork angle where the pallet jack fork meets the handle. If the angle exceeds the original angle by 3°, the fork cannot be used further. We can't ignore the problem just because the change in angle is very small, but small angles can also cause big problems. Therefore, we recommend that a dedicated evaluation of the fork be made annually. In fact, there is a better way to reduce this risk, is to check this item as a regular item on a monthly or quarterly basis.

When cracks or cracks appear, remind everyone that it is time to replace the equipment forks. A broken or cracked fork on a custom electric hydraulic pallet truck is a very obvious sign that reminds us that we need Genhua forks. It is a wise choice to deal with it early. Even if there is a problem with one fork, two forks should be replaced. This is the same principle as replacing tires. It is mainly to balance the use and life of the forks. Usually one fork bears more daily wear and tear than the other fork. If the fork cannot be fully utilized from the performance level, The risk will increase significantly.

If you are looking for an effective and safe way to take care of electric stacker, then pallet stacker truck +pallet +jack +supplier are the best bet.
Ningbo Staxx Material Handling Equipment Co.,Ltd. strives to reflect the highest ethical standards in our relationships with members, providers, and shareholders.
Ningbo Staxx Material Handling Equipment Co.,Ltd. expects to reach the desired profits in the first year and does not anticipate serious cash flow problems.
The only cardinal rule with adding animation is to keep high-quality on pallet stacker truck.
If something seems too good to be true, then it can be a , which provides hydraulic hand pallet truck value over its cost.