Will the oil leakage of the electric stacker car body affect its service life?

As an industrial handling vehicle, the electric stacker is mainly powered by an electric motor, and then loads and unloads, stacks, stacks and transports various wheeled handling vehicles for palletized goods over a short distance. What factors are related to the efficiency and service life of the electric stacker? Normally, after a week of use of the all-electric stacker, we need to perform regular maintenance on it.

1. Safety rules for the maintenance of all-electric stackers

(1) Keep the maintenance site clean and hygienic.

(2) Before repairing the all-electric stacker, unplug the power socket and disconnect the power supply.

(3) During maintenance, do not bring loose items or valuables on your body. (Note: When repairing the electrical system of the all-electric stacker, if the metal contacts the energized electronic components, it may cause a short circuit or burn. Therefore, please take off the watch, earrings or other accessories.) Transport the truck.

(4) When checking the oil leakage of the car body, please wipe it with paper or cardboard, and do not touch it directly with your hands. To avoid burns

(5) Please note that the oil temperature in the transmission or hydraulic system may be high, and the all-electric stacker should be cooled first, and then the gear oil or hydraulic oil should be replaced to prevent the high oil temperature from causing combustion. Stacker.

(6) Before opening the left and right box covers or the electrical system, the key switch of the all-electric stacker should be turned off. (7) Before checking the hydraulic system, the fork should be lowered to release the system pressure.

(8) The hydraulic system should be filled with new clean oil. (Note: If the hydraulic oil is not clean, it will affect the precise hydraulic components and reduce the capacity of the entire hydraulic system of the electric stacker. If different grades of hydraulic oil are used, it will damage the hydraulic components and also affect the System capacity. Therefore, when adding or replacing hydraulic fluid, pay attention to the use of uniform grades). Manual hydraulic truck.

(9) When working under the all-electric stacker, the all-electric stacker should be firmly supported by the bracket.

(10) When the body is welded, disconnect the battery power. Because the welding current may enter the battery during welding, in order to avoid this situation, please cut off the battery.

(11) Please abide by relevant laws and regulations, protect the environment, store and discharge oil according to regulations, and do not discharge it into the sewer.

Second, the maintenance of the electric stacker motor

(1) Do a comprehensive maintenance of the motor once a year.

(2) Inspection and maintenance of the motor should be carried out under power-off.

(3) Check whether the connection wire of the motor outlet is correct and firm. .

(4) Check whether the commutator space is clean, and the brush should slide freely in the brush box

(5) Use a 250-volt megger to measure the cold state of the motor every three months Insulation resistance, its resistance value should be greater than 0.5MΩ, if the resistance value is less than 0.5MΩ, it should be dried.

(6) Check the wear of the brushes every three months, and replace the brushes as appropriate.

(7) Check that all fasteners are tight. Semi-electric stacker.

The normal service life of an electric stacker is five to six years or six to seven years. If it is not properly maintained, the lifespan will be greatly reduced, while the annual average of foreign electric stackers The working hours are also much lower than the annual average working hours of domestic electric stackers. After four to five years of normal operation, the working performance of the electric stacker will be significantly different from that of the new car. This is because of the wear and tear of various parts, especially the power system parts, which will slow down the working speed and cause the system Fever, resulting in slower work speed, longer working hours, and reduced work efficiency. Secondly, after the electric stacker has been in operation for three to four years, the friction of various parts will cause serious wear and tear, resulting in increased noise when each part is working, and due to the wear and tear, the matching gap will expand.

Most places have a few choices when it comes to pedestrian pallet stacker pallet stacker truck distributors, but it can sometimes be difficult to find the right supplier for your needs. The quality of pallet stacker truck is critical to hydraulic hand pallet truck.
Boasting good reputation in the industry, Ningbo Staxx Material Handling Equipment Co.,Ltd. is the leading pallet stacker truck supplier, offering high quality and pallet stacker truck services for homes and enterprised all over the world. More info on Staxx Pallet Truck.
Ningbo Staxx Material Handling Equipment Co.,Ltd. knew if this worked for us, it would work for others, so we took the exclusive product and program and re-developed it to be more accessible to customers.
For Ningbo Staxx Material Handling Equipment Co.,Ltd. as a whole to adopt an attitude of acceptance toward change and technological innovation, we first have to truly embrace it and practice what they preach. Technological development needs to be more than just another investment, but a complete integration.
Overwhelming customers with too much information or the slew of benefits pallet stacker truck provides–even if they're all valid–is a surefire way to lose their attention.