90% of people don't know how to add water to the battery of the electric pallet truck?

How to fill the lithium ion pallet jack battery with water?

Engaged in the logistics industry, always uses the electric pallet truck repeatedly in his daily handling. After many times of charging and discharging, the lithium ion pallet jack is always unable to move, and I always feel that there is no strength. The battery that used to work continuously for 6 hours can only work for 4 hours now. The battery of the electric truck needs to be filled with water.

Then the question is, why should the lithium ion pallet jack be given water? How about adding water to the battery of the lithium pallet truck?

Staxx Pallet Truck Encyclopedia Tells You:

During the charging and discharging process, due to electrolysis and evaporation, the water in the electrolyte will gradually decrease, thus causing the electrolyte level to drop. If it is not replenished in time, it may shorten the service life of the battery of the lithium ion pallet jack.

Q: What kind of water should be injected?

The water used to supplement the battery of the electric pallet truck should be distilled water. Do not choose pure drinking water instead of distilled water for cheap. After all, pure water contains a variety of trace elements, which will adversely affect the battery of the pallet truck.

Special attention:

Sometimes the lithium ion pallet jack fails to start, and many people think that it is caused by the insufficient power storage of the lithium pallet truck, and they often add electrolyte to the battery, resulting in On the contrary, it greatly shortens the service life of the battery. The battery of the lithium pallet truck is running normally, only water can be added, and electrolyte must not be added! If the battery of the lithium pallet truck is dumped and the electrolyte flows out and causes loss, the electrolyte can be replenished. The electrolyte to supplement the lithium ion pallet jack needs to be supplemented according to the density of the original electrolyte.

Q: When do I need to add distilled water?

Lithium pallet truck battery, just gently open the small cap of the battery to see if the inside of the battery cap is dry or if the water volume reaches the warning line, you can judge Whether the battery needs to be watered. In addition, the plates of the battery are wrapped with white fiberglass wool, which should be wet under normal conditions.

Specific method:

Inhale distilled water with a dropper and inject it into the battery through the vent hole. Cover the vent hole with a breathable cover to prevent dust from falling into the vent hole. The principle of hydration is to prefer less than more. If it is not enough, it can be added. If it is too much, the specific gravity of the acid will drop, and the battery capacity will be insufficient. Inexperienced people can master it by 5mL per hole, and use glass, plastic and other straws for water replenishment tools. It is recommended to use a medical disposable syringe, which is convenient to use and convenient to measure. No metal-containing utensils can be used for hydration tools. The metal needle should be pulled out of the syringe and a plastic tube should be put on it before use.

Ningbo Staxx Material Handling Equipment Co.,Ltd. have now decided to extend our company in other countries.

Crazy about products? Ningbo Staxx Material Handling Equipment Co.,Ltd. is the place you must shop at, do visit Staxx lithium ion pallet jack to check out our latest collections!

Basically, you cannot have a hydraulic hand pallet truck without having the right lithium pallet truck. Since you are going to use it regularly, be sure to invest in one that has a high quality.

Regularly improving pallet stacker truck in accordance with customer feedback is a great way to show your brand listens and cares.