Unique in the market, quick error detect, easier service, save service time,save labor cost.
I.Vehicle operation status display
- Working hour/battery capacity display
II.Quick Error detecting
- Error code display
III.All maintenance information visualized
- Quick error point locate.
Truck can be operate when handle in Up-right position.
Easy active access, suitable for narrow aisle working condition.
1) Belly Button Pressed+ Forward Knob Hold;
2) Turn on Key Switch;
3) Pull up Emergency Stop button for active Up-drive mode.
Turtle and Rabbit Speed shift by button press.
Easy steering and comfortable operation.
One Piece Metal Rear Cover, durable life time built.
Traveling Speed Automatic decline to 2km/h, when fork lift over 500mm.
More Safety and prevent any misoperation.
Unique in the market, idea from trailer goods picking, with a simple remote device, the operator can control the stacker lift and lowering to any suitable working height, save effort and be efficient.
Remote Control Video Introduction: https://youtu.be/kZLLPsiS-oU
Vehicle operation status display
Quick Error detecting
All maintenance information visualized
Turtle Speed function
Up-right drive function
Under Operation status display interface, press and hold the Turtle button for 10 seconds to enter the Engineering Interface, press and hold the Turtle button for 10 seconds to return to the Operation status display interface
◆ LOCK : Interlock switch status
◆ Belly : Emergency reverse switch status
◆ BRAKE : Electromagnetic brake status
◆ HORN : Horn switch indication.
◆ FWD : Forward driving status
◆ REV : Backward driving status
◆ UP : Lifting status
◆ DOWN : Lowering status.
◆ UpLim : Lifting height limitations status
◆ UpRun : Up right drive status
◆ CREEP : Turtle speed status
◆ CONT : Contactor status
◆ Temp : 20.0C - Controller temperature
◆ Volt : 0.0V - Accelerator voltage output
With traditional Handle
SEND A TECH TO PHYSICAL CHECK AT THE CUSTOMER SITE.
1. Check if controller has error code flashing to locate the failure direction.
2. Check the interlock switch is good or not, with visual checking or multi-meter
3. Check the brake is open or not, with sound checking or multi-meter.
4. Check the forward/backward signal and accelerator in good condition or not, use multi-meter.
5. Check the contactor is connect or not, sound checking and visual checking
After above the on-site tech can locate the problem and then with bring parts for replacement or go back to bring the parts come again to fix the problem.
Professional Tech request!
High labor cost!
High service cost!
WITH STAXX Multifunction Intelligent Handle
NO NEED SEND A Tech to CUSTOMER SITE!
1.Telephone call customer to shift screen to Engineering Interface.
2.Error code displaying on handle, can easy and quick indicate failure.
3.Ask customer to push forward throttle and backward throttle.
4.In blow picture showing: LOCK, FWD/REV, BRAKE, CONT, if all in any of them not
in GREEN when operate forward, means the relevant part is broken or in problem.
5.Locate the problem & broken parts quick and easy, bring the parts or send the parts to customer for replacement and solve the problem.
Easy and timely!
Service cost saving!
No need high professional tech!
Get in touch
If you have any questions about our products or services, feel free to reach out to customer service team.
Use our contact form on our contact details page or call us to discuss this product further.
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.