Pedestrian Full Electric Lift Stacker Manufacturers PWS10S/15S-i

The handle of our electric lifter stacker is unique in the market, quick error detect, easier service, save service time,save labor cost.

I.Vehicle operation status display
  - Up/down/forward/backward
  - Working hour/battery capacity display
II.Quick Error detecting
  - Error code display
III.All maintenance information visualized
  - Quick error point locate.

Staxx electric pedestrian stacker can be operate when handle in Up-right position.
Easy active access, suitable for narrow aisle working condition.  
Active Method:   
1) Belly Button Pressed+ Forward Knob Hold;
2) Turn on Key Switch;
3) Pull up Emergency Stop button for active Up-drive mode.

Turtle and rabbit speed shift by button press of full electric stacker.

Electric pedestrian stacker with the features of easy steering and comfortable operation.

The stacker from staxx electric stacker manufacturers with one-piece metal rear cover, durable lifetime building.

Traveling Speed Automatic decline to 2km/h, when fork lift over 500mm.

More Safety and prevent any misoperation.

Unique in the market, idea from trailer goods picking, with a simple remote device, the operator can control the stacker lift and lowering to any suitable working height, save effort and be efficient.

Remote Control Video Introduction: https://youtu.be/kZLLPsiS-oU 

SEND A TECH TO PHYSICAL CHECK AT THE CUSTOMER SITE.

1. Check if controller has error code flashing to locate the failure direction.

2. Check the interlock switch is good or not, with visual checking or multi-meter  

3. Check the brake is open or not, with sound checking or multi-meter.

4. Check the forward/backward signal and accelerator in good condition or not, use multi-meter.

5. Check the contactor is connect or not, sound checking and visual checking

After above the on-site tech can locate the problem and then with bring parts for replacement or go back to bring the parts come again to fix the problem.

NO NEED SEND A Tech to CUSTOMER SITE!

1.Telephone call customer to shift screen to Engineering Interface.
2.Error code displaying on handle, can easy and quick indicate failure.
3.Ask customer to push forward throttle and backward throttle.
4.In blow picture showing: LOCK, FWD/REV, BRAKE, CONT, if all in any of them not
in GREEN when operate forward, means the relevant part is broken or in problem.
5.Locate the problem & broken parts quick and easy, bring the parts or send the parts to customer for replacement and solve the problem.