Reasons for the failure of electric trucks and how to deal with them

Regardless of the quality of any mechanical equipment, after a certain number of times and a certain number of years of use, there will be large and small failures. The light ones can be repaired, and the heavy ones must be scrapped. In order to avoid waste of resources, the operator needs to understand Reasons for the failure of electric pallet trucks and how to deal with them.

1. The truck shakes violently when it is greatly lifted

This is mostly because there is gas in the cylinder of the electric pallet truck, which can increase the load or exhaust it; the second reason is that the hydraulic pump of the hydraulic truck has oil leakage, which must be repaired and replaced in time. Oil seals and hydraulic cylinders.

2. Automatically descend when carrying heavy goods

This situation may be due to a large amount of oil leakage in the oil pipeline or oil line joint of the handling hydraulic vehicle. The old seals can be removed and replaced.

It is also possible that the reversing valve is stuck by waste products or the seal is damaged and fails. You can clean the valve block and replace the seal.

3. The ascent is very slow or unable to ascend

When the amount of oil in the oil pump is too small or the voltage is insufficient, this situation will occur, and the truck can be supplemented with energy for normal use. It is also possible that the oil has deteriorated, mixed with impurities, entered air, etc., and the hydraulic oil needs to be replaced in time.

4. The wheels have abnormal noise when walking

When the wheel fails, you can first check whether there are hard debris around and inside the lower wheel. If not, you can remove the wheel and apply lubricating oil; if it is excessively worn or damaged, it needs to be replaced in time.

Although the fault can be repaired or re-purchased to obtain satisfactory results, but the delay in the processing process has affected everyone's use and work, so customers must pay attention to maintenance work in the process of using electric pallet trucks.