The use of batteries of electric storage pallet trucks

Today, the use of electric storage pallet trucks can be said to be more and more widespread. In the daily handling work, more emphasis is placed on the control of work efficiency and cost. The use of electric pallet trucks can be said to effectively resolve these two problems at the same time. Not only that, it is also responsible for environmental protection, because using electricity as power will avoid the generation of pollutants, and the noise is very small, which is very beneficial to people's physical and mental health. However, many people are not very familiar with the maintenance work of electric pallet trucks and the related common sense of use, then we will popularize the relevant knowledge for you.

When it comes to electric storage pallet trucks, we can't avoid the related content of batteries. People's maintenance of electric pallet truck batteries is a shortcoming, and even ignored. But we want to tell you that doing a good job in maintenance will extend the life of your equipment. It can be compared, the same electric pallet truck under the same conditions, which one will break first if it is carefully maintained or if it is ignored? The answer is obvious. We must understand that replacing the battery also costs a lot, so why waste this money?

Before charging the battery of the electric storage pallet truck, check the battery temperature to see if it is lower than 30°C and whether the electrolyte level is not lower than the separator. After that, check whether the wire can be used normally, connect the battery charging socket to the charging plug of the charger, and then place the charging device in the open position.

During the charging process of the battery of the electric storage pallet truck, the battery temperature should not be higher than 45℃. If it exceeds this range, stop charging and wait for the battery to cool down before recharging with a lower current. , to ensure the safety of electricity. Generally, the charging time is 14-16 hours. After charging, the electrolyte density of the battery will reach 1.27-1.29kg/1.25℃, and the voltage will be about 2.7V. It is recommended that you do the charging and maintenance work on the day after using the electric pallet truck.

After the battery of the electric storage pallet truck is fully charged, disconnect the charging current of the charger, and the 'STOP' indicator light is on. At this time, turn off the switch and unplug the charger to avoid accidents. to unnecessary losses.

The above is about the use of electric storage pallet trucks. If you have questions about electric pallet trucks to consult or have the intention to buy electric pallet trucks, Welcome to call!