Daily maintenance and maintenance of electric pallet trucks

As a powerful assistant in the handling of the warehousing and logistics industry, electric pallet trucks provide convenience for warehousing operations, not only improve work efficiency, but also ensure the safety of operators and make work easier. In order to enable electric pallet trucks to provide services for a longer period of time and save enterprise management and operating costs, the daily maintenance and maintenance of electric pallet trucks should also be guaranteed.

Electric van battery

It is strictly forbidden to overcharge or overdischarge the battery, and charge it in a balanced manner. The newly purchased electric pallet truck should be fully charged when it is charged for the first time, and the battery should be charged according to the frequency of work and in a planned manner. When charging, do not place conductive items on the battery, and keep the battery surface clean and dry.

Be sure to check the voltage, electrolyte density, and temperature of the battery every week, and make a total measurement every month. Under normal circumstances, the battery needs to be placed in a clean, dry, and ventilated place without direct sunlight, or turning the battery upside down, let alone hitting or pressing the battery.

After using the truck at ordinary times, it is necessary to clean up the dirt and garbage on the truck, and check whether the power cord is intact and not damaged.

Daily maintenance of electric pallet truck

During the hydraulic maintenance of the electric pallet truck, check whether the oil cylinder is leaking, whether there are any problems with the joints, rubber hoses, etc., and whether the electrical insulation part is normal.

When getting out of the vehicle, check whether there are any obstacles around. Don’t let the truck collide with obstacles. If an accident occurs and the vehicle is out of control, quickly pull down the power switch to cut off the power. When the vehicle is started, the operator checks whether the handbrake is in the place where it should be. If the handbrake is not put down and started, the car will be damaged, and the vehicle will be scrapped if it is serious.

When the vehicle cannot be started, it is necessary to turn off the forward and reverse switch and turn it on again before it can be started. When the vehicle is not starting, never slam on the accelerator pedal, as this will increase the danger. Before leaving the vehicle, the operator should pull up the hand brake and pull up the main switch of the power supply, and then leave the vehicle after taking out the key.

The above is the basic maintenance and maintenance knowledge of electric pallet trucks, and the details determine the cost.

(