Forklifts take you to understand the use and maintenance of manual hydraulic forklifts

How to use the forklift:

1. On a good road, the forklift has a rated lifting capacity of 3 tons. When working on a poor route, the lifting weight should be suitable for lowering and driving. rate.

2. When loading goods, the height of the forks should be adjusted according to the details of the goods. The weight of the goods should be evenly divided by the two forks to avoid the partial load causing the goods to slip to one wall. After the fork is inserted into the cargo pile, the fork wall should confront the side of the goods, and then adjust the height of the fork, raise the fork more than 20 mm from the ground before driving.

3. When carrying goods on a slope of 7° in advance, the goods should be on the upper side of the slope. Do not apply sudden brakes when transporting goods to prevent the goods from slipping out. When handling large-volume goods, the goods are blocking the line of sight, and the forklift should reverse and drive at a low speed.

4. In the process of employment, if any suspected abnormal signs are detected, it is mandatory to park and inspect immediately, and immediately take actions to eliminate them, and do not continue to work until the problem is eliminated.

5. Once employment is normal, the forklift should be parked at a designated location.

6. No one is allowed to use a lithium pallet truck without the consent of the manager. In order to improve the service life of the forklift and to avoid accidents, in order to preserve the best operating form of the forklift and the normal operation of various parts, the machine is forced to strictly implement regular maintenance during the use process.

7. Check the fastening conditions of the connecting parts of each machine of the forklift, especially whether the connecting bolts and locking devices of the steering system, wheels, lifting organization, etc. can be fastened and accurate.

8. Inspect the pipelines and joints of each part of the forklift for damage, looseness and oil leakage.

9. Forklifts can only be used in designated areas: the first and second floors and warehouses of the new workshop, no special circumstances do not agree to use forklifts outside the workshop;

truck maintenance:

In order to ensure the normal and reliable employment of forklift trucks, and display its due employment effects, the related responsible person regularly performs the following skills asylum care:

1. trucks: every shift After the termination of employment, wash the dirt and soil on the car body in real time, check whether the car body is scratched, and whether the steering gear is reliable and flexible;

2. First-level technical recuperation: After 100 hours of employment, (One-shift employment system is relative to two weeks) Check the fastening conditions of each part, focusing on the fork frame support, wheel screws, wheel pin, and steering gear screws.

3. Second-level technical recuperation: After 500 hours of cumulative employment, (one-shift employment system is relative to one quarter)

Do the whole vehicle inspection, focusing on: all pipe joints, machine Oil tanks, landing cylinders, hydraulic steering gears, steering cylinders, etc., are real-time tightening, replenishing hydraulic oil, and adding lubricating oil in real-time conditions.