Function introduction of each component of the semi-electric stacker

Many enterprises often choose semi-electric stackers when performing a single pallet stacking operation. The semi-electric stacker walks manually and electric lifts. Compared with full-electric stackers, the cost is low and does not occupy too much enterprise Moreover, unitized pallet stacking is safe and efficient, and can fully reflect its outstanding flexibility and environmental protection performance. In view of the excellence of the semi-electric stacker, let's have a comprehensive understanding of this model.

Let's first look at the working principle of the semi-electric stacker: when the semi-electric lift is lifted, the joystick is used to lift and lower, and the pump station is controlled to work, and the inner and outer masts and slides are directly driven by the oil cylinder to lift, so that the fork can be lifted.

The machine component structure of the semi-electric stacker: battery, motor, hydraulic pump station, piston rod, chain, wheel, handle, mast, fork and other components.

The drive of the semi-electric stacker: the semi-electric stacker is driven by manpower, and the special craft nylon or polyurethane wheels are selected, which are wear-resistant, pressure-resistant and quiet. Manual control has its advantages, such as flexible operation, and easy conversion when turning and going straight.

Steering operation of the semi-electric stacker: the manipulation of the steering handle acts on the steering wheels on both sides through the steering mechanism, which is lighter and more flexible when turning. Therefore, just turn the steering handle directly to the required angle.

The circuit of the semi-electric stacker: it is powered by the battery, and the power shows the capacity or voltage of the battery. It has a low-voltage protection function and can more intuitively reflect the working status; the key switch controls the entire circuit, and the built-in charger is equipped with a conversion relay switch. Automatically cut off the working power supply, safer and more reliable. The selection of the wire harness meets the operation requirements of the entire circuit, and the selection of all electrical components is safe and reliable.

The hydraulic circuit of the semi-electric stacker: when the fork needs to be lifted or lowered, by adjusting the hydraulic pull rod, the pump station can drive the relative movement of the inner and outer masts and the slide frame through the oil cylinder, so that the fork can rise and fall. Pressure limiting valves are included in hydraulic pumps to protect the vehicle and hydraulic system in case of overload.

Parking brake of the semi-electric stacker: through the operation of the foot brake, the brake directly acts on the universal wheel, and immediately plays the role of braking.

The above is the introduction of the functions of the components of the semi-electric stacker shared by the manufacturer of the semi-electric stacker. I hope it can help you when purchasing a semi-electric stacker.