Have you maintained it well while enjoying the convenience of the electric stacker?

The emergence of electric pallet trucks has brought great convenience to the loading, unloading and transshipment work. With the development of society and economy, the places where it is used has become more and more widespread, and more and more industries cannot do without electric pallet trucks. stacker. Because of its good convenience, economy and operability, it is often used very frequently. Unfortunately, most people rely on the convenience brought by it but often ignore its maintenance and maintenance, which often causes some failures. , the following are some precautions for the maintenance of electric pallet trucks.

1. Battery maintenance of the electric handling stacker

Check whether the connection of the charging circuit is reliable, check whether the connection between the connection and the plug is in good condition; check the charger of the electric handling stacker Check whether the battery is in good condition, check whether the battery is seriously lacking liquid; check whether the plate has irreversible sulfation.

2. The circuit part of the electric handling stacker

Do not use the electric handling stacker under voltage; do not use the electric handling stacker while charging; pay attention to rain protection.

3. The forks of the electric handling stacker have fixed pallet type and movable fork type

movable fork There is a spacer at the connection between the root and the electric handling stacker, and the height of the spacer is adjusted by screws to achieve the purpose of adjusting the height of the front section of the fork.

4. Oil leakage from electric handling stacker

Most of the oil leakage is at the connection between the oil pipe and the oil cylinder or pump station. Tighten the nut for a few more turns, but remember not to use too much force, otherwise it will lead to slippage. If it is confirmed that the nut has been tightened and the oil continues to leak, the nut needs to be disassembled, the gasket or explosion-proof valve should be replaced with the correct model or a new one, and then tightened again. Generally, the fault can be solved. When removing the nut, the fork must be lowered to a very low level, so that all the hydraulic oil in the oil circuit has been returned to the cylinder of the pump station to avoid a large amount of leakage.

With the help of electric pallet trucks, people can reduce the light workload and have beautiful work efficiency, and the frequency of use is high. The maintenance of the electric pallet truck is not only the points mentioned in the above content, but it should also be cherished as much as possible. Although the low failure rate is one of its major advantages, everyone is enjoying the convenience brought by technology. Please don't forget to take care of them at any time, it is not only responsible for the machine but also for yourself.