How long can the battery of the electric pallet truck generally be used?

I believe that many people are more concerned about the life of electric pallet trucks, but this issue varies from person to person, because the environment and the frequency of operating electric pallet trucks are different, and the maintenance of electric pallet trucks is a different. This reference value cannot be exceeded.

First of all, generally speaking, the service life of an all-electric handling stacker is five or six years. If the all-electric handling stacker is used too frequently or in a harsh environment, the service life will be shortened accordingly. In addition, the service life of an all-electric handling stacker is also closely related to maintenance. Under the same frequency of use and environment, if you are good at maintenance, you can extend the service life of the all-electric handling stacker to a certain extent, and vice versa. Due to the wear and tear of the parts of the stacker, the work efficiency is low and the noise is increased, so after four or five years of normal operation, the working performance of this all-electric stacker will have a big gap with the new all-electric stacker.

If the electric stacker has been used for four or five years or more, its condition should be observed before each use. Need to cancel the update in time.

How long does the electric stacker generally last?

Ordinary stack high car battery charge and discharge about 2000 times. A brand-new battery that is recharged once can generally be used for 2-5 years, but if it is overloaded, it will last 2 years less, work normally, and be properly maintained, and the battery life of a stacked electric vehicle can be as long as 5 years.

How to properly maintain the battery of the all-electric handling stacker?

1. In normal use of the full-electric loading and unloading stacker, the moisture loss of a battery is about 4ML/100AH u200bu200bin one charge and discharge cycle. A 500AH unit battery needs to be used to replenish 20ML of pure water.

2. After the battery of the all-electric loading and unloading stacker is replenished with water, the liquid level of the battery must not exceed 10mm of the splash guard. The reasons are as follows:

A. If the liquid level is too high, the battery The contact between the liquid capacity and the aluminum row welded between the battery plates of the all-electric handling stacker will cause ionic pollution to the battery fluid, thereby enhancing the discharge of the all-electric handling stacker battery pack and damaging the all-electric handling stacker. Battery capacity and service life.

The high liquid level will cause the battery fluid to overflow, resulting in a decrease in the concentration of the battery fluid, thereby reducing the concentration of the battery fluid, thereby reducing the battery capacity of the all-electric handling stacker and battery voltage. Moreover, the spilled battery fluid will corrode the battery transport stacker and the battery.

3. If the battery liquid level is insufficient, when the battery of the all-electric handling stacker is used, the upper end of the battery plate will be exposed to the battery liquid, which reduces the battery plate's participation in the electrochemical reaction. area, thereby reducing the battery life of the all-electric handling stacker.

.