As a cost-effective electric pallet truck
, its forklift tires are also in various forms. The tires of electric forklifts include pneumatic tires and solid tires. Special attention: The tire inflation pressure must be in accordance with the original manufacturer's standard and must not be too high or too low. If it is too high, the elasticity of the tire will decrease and the thread layer will be easily broken. Too low air pressure will cause violent deformation of the tire, increase in temperature, and cause degumming or breakage. It may also cause the tire to move on the rim and wear the bead. In severe cases, the inner tube valve will be torn. When a forklift tire has an accident, you need to know this remedial knowledge: (1) Tire: When the tire has cracks, holes, blisters, delamination, etc., it should be repaired or overhauled according to the specific conditions. When there are continuous cracks around the carcass of the tire casing, the tread rubber has been polished and there are large holes, the carcass line layer has annular cracks and the whole circle is separated, it should be replaced. (2) Inner tube: When small holes are found, hot patch or cold patch can be performed. Hot repair: File the roughness around the damaged part of the inner tube, paste the fire repair rubber on the damaged part, and make the hole and small hole just in the center of the repair rubber, then install the tire repair clamp on the normalizing repair rubber, and tighten the screw pressure Ignite the heating agent on the hot glue and wait for 10-15 minutes to bond tightly. Raw rubber patch (cold patch): File rough around the tear of the inner tube, apply raw glue, and apply secondary glue after the surface of the glue is slightly dry. When the glue is air-dried, attach the prepared raw rubber to the tear. Pressurize and heat 140-145℃, keep the temperature for 10-20min to vulcanize the raw rubber, after cooling, it can be tightly bonded. The inner tube is folded, severely broken and cannot be repaired; it is aging and sticky and deteriorated; deformed or excessively cracked can be scrapped and replaced. The main reasons for the explosion or wear of forklift tires are improper use and failure to grasp the load and air pressure standards. In order to prolong the service life of tires during normal use, it is necessary to master the load and air pressure standards, keep the forklift in a good technical condition, drive normally, and reasonably select and match tires and reasonable loading. In addition, in the purchase process, it is very important to choose high-quality forklift tires, such as Hangzhou forklifts. The original forklift tires of the electric pallet truck have a relatively long service life and are not easy to explode.
are important in ensuring pedestrian pallet stacker, and the machine is utilised by everyone from semi electric pallet stacker to +pallet +jack +supplier.
Ningbo Staxx Material Handling Equipment Co.,Ltd. will make a healthy profit for its owners and provide a rewarding work environment for its employees.
With a few simple , and a little bit of hand pallet truck manufacturers, you to can handle staxx pallet truck on your own.
Equipping pallet stacker truck
with innovative technology and updated processes will simplify daily compliance duties so that they can focus on attracting, retaining, and developing the most engaged workforce possible.
Ningbo Staxx Material Handling Equipment Co.,Ltd. believes that the shorter the path between consumer and product, the more likely businesses are to convert more sales.