How to use and maintain the battery of semi-electric stacker correctly?

The semi-electric stacker is a kind of manual push-pull walking, which can be lifted and lowered electrically. Semi-electric forklifts are suitable for short-distance transportation in factories, warehouses, logistics and other enterprises and loading and unloading in areas with low workload. The maintenance of the semi-electric stacker is relatively simple. Maintenance of key battery components is a top priority. How to charge the battery of semi-electric stacker? We understand from the following points.

1. The charging environment of the semi-electric hydraulic forklift is clean and ventilated. If possible, the battery can be taken out or the cover of the semi-electric forklift can be opened;

2. The electrolyte liquid level of the semi-electric stacker should be 15mm higher than the separator, and the electrolyte should be replenished in time below this scale line to prevent the battery from losing power and affect the life of the light battery. - Semi-electric stacker. In addition, the temperature of the electrolyte should not be higher than 45 degrees during charging;

3. Do not expose the semi-electric forklift to open flames when charging, because the battery will generate a large amount of flammable gas during charging, so prevent the semi-electric forklift from catching fire during the charging process. charging process;

4. The semi-electric stacker should avoid contact with the skin and acid during the charging process. If exposed, use plenty of soapy water or consult a doctor;

5. The battery should be kept clean and dry at ordinary times, and it is not allowed to place other items on the battery of the semi-electric hydraulic forklift;

6. Waste batteries of semi-electric stackers should be disposed of in accordance with the National Environmental Protection Law.

The semi-electric stacker can generally carry a load of 2 tons, and the load will decrease with the load curve after exceeding 2 meters. After lifting 2 meters, it can carry 1-1.3 tons, and when it is lifted to 3 meters, it can carry only 800 kilograms. This has to do with the load profile. The higher the height, the lower the load. Appears over 2 meters“lost load”Phenomenon.

The load curve change diagram produced by the semi-electric stacker forklift manufacturer must strictly follow this curve when stacking goods. Don't get away with it: it might, just might not happen! If it happened, the injury would be fatal. Therefore, the purchase of a semi-electric stacker must be determined according to the actual usage! Then it is to choose products that meet safety standards and have reliable after-sales service.