Pallet trucks--Precautions for the use of manual stackers

The manual stacker is a small storage pallet truck with the advantages of small size, simple operation and low cost. It is suitable for short-distance light cargo stacking. The hand-operated fork has the advantages of a hand-operated pallet truck, but it should also be operated strictly according to the usage specifications of the hand trolley.

What are the taboos in the use of artificial stacking vehicles?

The vehicle body, oil cylinder, etc. are not inspected in detail before use, so that the goods may not be able to fight during use, or cannot be lowered after being raised. Because the adjustment of the relief valve is too loose or too tight.

In the process of using the manual stacker, pay attention to the order in which the pallet truck lifts the goods. For example, after lifting the pallet, it needs to move a certain distance. The electric pallet lift truck height of the fork should not be too high. The general distance does not prevent the pallet truck from moving. If the lift is too high, the center of gravity of the pallet truck will move upward, and the chassis will be unstable and easy to tilt, which may cause casualties in severe cases.

When using a manual stacker to stack goods, do not pay attention to increase the load ratio, and the overload will cause the vehicle to overturn. Therefore, it is necessary to pay attention to the load-to-electric pallet lift truck ratio. Generally, the standard electric pallet lift truck of a manual stacker is 1.6 meters. If the goods need to be stacked up to 1.6 meters, the load should be appropriately reduced on the basis of the rated load to ensure the service life and safety of the vehicle.

Improper use of the tray is also a dangerous thing. The pallet is too large, which is inconsistent with the fork size of the manual stacker, causing the center of gravity of the goods to shift, and eventually overturning and causing an accident. Generally speaking, when the electric pallet truck manufacturer explains the usage, it will say that the pallet used by the manual stacker is a nine-leg or Sichuan pallet, and the pallet size also needs to be asked clearly.

.