Problems that may occur after the installation of the high-altitude lifting platform

In many cases, after the installation of high-altitude lifting platforms in factories, floors, docks and other places, there will be some adverse reactions in the early stage, and some problems of this kind will appear. Then, how should we deal with and prevent these problems? First of all, leakage occurs. Because of the loosening, vibration of the machine and the influence of the machine's heat, there will be leakage in the sealing surface of the machine and the pipe joints; some shortcomings such as casting and processing are difficult to find during installation and commissioning. However, due to the vibration and impact effects during the operation, this shortcoming is exposed, manifested as leakage (seepage) of oil (water). Therefore, the leakage phenomenon is simply present during the running-in period. Secondly, poor smoothness, because the cooperation gap of newly installed parts is small, and because of installation and other reasons, it is difficult to ensure the uniformity of the cooperation gap. The smooth oil is not easy to form a uniform oil film on the surface of the conflict to prevent wear. Then the smoothing performance is reduced, and the abnormal wear of the mechanical parts is formed. In severe cases, the appearance of fine and cooperative conflicts will be scratched or bitten, leading to the onset of problems. Third, loosening occurs. The newly processed and installed parts have slight deviations in shape and cooperation dimensions. In the initial stage of use, they are affected by alternating loads such as impact and oscillation, as well as heat, deformation and other factors, as well as excessive wear. Wait for the reason, and simply loosen the originally fastened parts. Fourth, the wear rate is fast. Because of the influence of the processing, installation and adjustment of new machine parts, the appearance of conflict is rough, the touch area of u200bu200bthe cooperation surface is small, and the pressure on the surface is uneven. During the operation of the machine, the concave and convex parts on the surface of the parts fit and conflict with each other, and the metal scraps that are ground down are used as abrasives to continue to participate in the conflict, which accelerates the wear of the cooperative appearance of the parts. Therefore, the wear of parts (especially the appearance of cooperation) is simply formed during the running-in period, and the wear rate is fast. At this time, if overloading work, it may cause damage to the parts and early failures. Fifth, there are many operating errors, because they do not understand the structure and function of the high-altitude lithium pallet truck platform (especially for new operators). Simple operating errors can cause problems and even cause mechanical incidents.
Ningbo Staxx Material Handling Equipment Co.,Ltd. is famous for creating innovative products like the pallet stacker truck and supporting their market leadership with savvy marketing campaigns to build an elite brand.
Dedicated to bringing you professional pallet stacker truck solutions and related products – from +pallet +jack +supplier to pallet jack manufacturers, Ningbo Staxx Material Handling Equipment Co.,Ltd. is your pallet stacker truck helper. Visit us at Staxx Pallet Stackers.
semi electric pallet stacker pallet stacker truck are primarily used for pallet jack for sale.