Teach everyone about motor maintenance

The electric equipment is the handling equipment that is used a lot in warehousing and warehouses today, and the motor is a very important part of the storage equipment such as the electric hydraulic pallet truck, so the daily maintenance of the motor is very important. became a very important part. But there are many friends who don't know how to maintain the motor very well. Then, we will spread the knowledge to everyone.

The reason why we maintain the motor is not only to ensure that the equipment does not fail, to ensure the smooth progress of the work, but also to prolong the life of the battery, which is also an indirect cost saving. The battery should be charged in time after use, and it should not be placed for more than 24 hours. To remind everyone, try not to overcharge the battery of the electric hydraulic pallet truck when charging. Overcharging the battery will seriously affect the performance and service life of the battery. And after the charging is completed, the battery liquid level should be checked in time, so that distilled water can be added in time to maintain the liquid level. Furthermore, under normal circumstances, dilute sulfuric acid cannot be added.

When charging, remind everyone to maintain good ventilation and no fireworks. The battery fluid hole plug and gas cover should be kept clean, removed or opened when charging, and then installed or closed after charging. The battery surface, connecting wires and screws should be kept dry and clean. If there is sulfuric acid, wipe it off with cotton yarn dipped in lye in time. Do not let the lye enter the battery, and avoid contact with any liquid and harmful substances. Any metal impurities must not fall into the battery.

The battery needs to be charged every 3 months for devices that are not used frequently or that have been left for a long time. If there is a 'backward battery' in the battery pack of the electric hydraulic pallet truck, at this time, equalization charging is only performed on the backward battery alone. Here is an explanation of what is a backward battery, which refers to a battery whose voltage value is lower than other batteries or has been repaired due to faults during the charging and discharging process.

Equalizing charging is mentioned above, so how to operate it? Answer for you. First carry out ordinary charging, stop charging for 1 hour when fully charged, and then use 0.25I5 to charge for 1 hour, repeat several times until the charger is closed and intense bubbles are generated in the battery. When placing the battery, avoid direct sunlight, and the distance from the heat source should not be less than 2M.