Tell you that the brakes should generally not be used when the forklift loads up or downhill

With the continuous development of technology, the forklifts produced by electric pallet truck manufacturers are getting better and better. Today's electric forklifts are not as heavy and difficult to operate as before. Ru0026D and design for environmental protection, etc. The compact body is convenient for operations in more narrow scenes. Although they are small in size, their use efficiency is very good. Although the operation of forklifts has become easier now, there are still some operations that need to be paid attention to when driving. What are the operating requirements?

1. When driving, the bottom end of the fork should be kept a certain distance from the ground height, and the gantry should be tilted backwards.

2. Do not raise the fork too high when driving. When entering and leaving the job site or while driving, be careful that there are no obstacles in the sky. When the load is traveling, if the fork is raised too high, the height of the overall center of gravity of the electric forklift will be increased, which will affect the stability of the electric forklift.

3. After unloading, the fork should be lowered to the normal driving position before driving.

4. When turning, if there are pedestrians or vehicles nearby, a signal should be issued and high-speed sharp turns should be prohibited. A sharp turn at high speed can cause the vehicle to lose lateral stability and tip over.

5. The internal combustion electric forklift is strictly prohibited to turn off and slide when going downhill.

6. Unless there are special circumstances, it is forbidden to brake suddenly while driving with loads.

7. When the load is over 7 degrees and the speed is higher than the first gear to go up and down the slope, the brakes shall not be used except in special circumstances.

8. The electric forklift must obey the traffic rules in the factory and keep a certain safety distance from the vehicle in front.

9. When the electric forklift is running, the load should be in a low position that does not hinder the driving, and the gantry should be properly tilted back. The load should not be raised when stacking or loading. When carrying large objects, the object blocks the driver's sight, and the electric lithium pallet truck should be turned upside down.

10. The steering of the electric lithium pallet truck is controlled by the rear wheels, so always pay attention to the swing behind the vehicle to avoid the phenomenon of excessive turning that often occurs when beginners drive.

11. It is forbidden to turn on the ramp, nor to drive across the ramp.

12. When the electric forklift truck goes downhill, it should drive backwards to prevent the goods from falling upside down.

The above are some of the operation matters that the electric lithium pallet truck manufacturers remind you when driving. Relevant practitioners should also pay attention to the daily maintenance and repair of electric pallet stacker in daily use, and should conduct systematic inspections before use. This greatly reduces the probability of forklift failure when the operation is halfway through, otherwise it will affect work efficiency. Models of electric forklifts today. There are many types, etc. Everyone should do some homework before purchasing, and then choose an economical forklift according to their actual needs.