The maintenance of electric forklifts during the summer and autumn seasons should be done as follows

The scorching summer has passed, and the temperature after autumn has slowly turned cooler, and the weather has changed significantly. When the summer and autumn seasons change, special attention should be paid to the maintenance of electric forklifts during use. The maintenance of this seasonal forklift should be as follows Point:

1. Vehicle interior maintenance

Sooner or later in autumn, there will be more dew, and the exterior of the forklift is often very wet. If the car body has significant scratches, it should be painted in real time to avoid The scratched parts are rusty and damp. Due to the erosion of rain and acid in summer rain and the direct sunlight in summer, the paint surface of the car body will inevitably be oxidized. When the season changes, you should do a cleaning and touch-up for the appearance of the forklift. The maintenance work of the tire.

Two. Tire maintenance

In the safe driving of the forklift, the tire plays an insignificant role. In the summer, due to the high temperature, it is necessary to always reflect on the tire pressure and cut It is not possible to make the tire pressure too high, otherwise, there will be a risk of a tire blowout, and in autumn, because the temperature is absolutely low, the tire must make up for the pressure to make it abandon the regular pressure range. At the same time, you should also reflect on the tire. Whether there are scratches or not, because the rubber tends to harden in the autumn and winter seasons, it is more brittle, and the tires are easy to leak, and even puncture the tires. You must always clean up the mixture in the tire tread.

3. Initiate maintenance of the engine room.

Introspect the engine oil, brake fluid, and antifreeze in the engine room to see if the fluid is short, whether it can be transformed, and whether it can reach the replacement cycle. These oils are like the blood of the vehicle, and the replacement cycle is certain. It is necessary to replace the loss to ensure the smoothness of the oil cycle.

Four. Maintenance of the brake system

In spring, the temperature difference between day and night is large, which is easy to cause the expansion and deformation of the car body parts. Whether the movement is weakened or deviated, whether the pedaling force of the brake pedal can be changed, and if necessary, liquidate all parts of the pipeline of the brake system.

Maintenance of heating pipes and electric fans

If your forklift is equipped with heating pipes or electric fans, through the operation of a hot day, or preparing for the coming cold summer, autumn is the most suitable to start introspection about these installations, and check the exhaust air inlet energy Whether the wind is abnormal, whether the route is aging, etc., if there is a problem, it can be dealt with in real time.

5. Maintenance of the air inlet or the style grill

There is debris, if there is debris, you can use a compressed atmosphere to blow away the dust, otherwise, in the engine cooling mode, you can use a water gun to wash the above parts from the inside out.

6. Air conditioning maintenance< /p>

If your forklift is equipped with air conditioning, the weather is very hot in the hot weather, and the air conditioning in the car is often overloaded. In addition, due to more rain in summer and autumn, it will easily cause the condenser to rust after a long time. In order to prolong the service life of the air conditioner, please reflect on the air conditioner form.

VII. Battery maintenance

The electrode wiring of the vehicle battery is the most prone to problem. If it is discovered that there is green oxide at the electrode wiring, it must be cleared in real time. These green oxides will cause excess power in the generator, and will cause the battery to be scrapped when it is important.

8. Cab maintenance

p>

The climate in the south is boring and dusty in spring. Please clean up the dust in the cab in real time to prevent dust from accumulating and entering fine parts such as meters, which will affect the function of the forklift. Regarding the forklift equipped with the cockpit, you should always open the windows. Give up the smooth atmosphere to ensure a fresh atmosphere in the car.

IX. Chassis maintenance

Normally, car owners are negligent about the chassis. When there is an oil leak or a deformation of the chassis, the chassis has long been invented. Rusty. For this reason, you should check the shape of the forklift chassis. In addition, the door shafts and guide rails are easily rusted due to the impact of wind and sand and the impact of car washing, and abnormal noises will be recovered when they are opened and closed. This kind of problem only needs to be checked regularly. Apply anti-rust oil below to deal with it.