Basic steps for the use of warehouse pallet truck manufacturers to customize manual pallet trucks

The manual pallet truck is a very commonly used handling equipment in many supermarket warehouses and factory warehouses. It is also a better product for customized sales by warehouse pallet truck manufacturers. Because of its affordable price and simple and flexible operation, it is deeply favored by the majority of people in the industry. favorite. But even with the simplest equipment, there are steps to operate. Next, let's take a look at the basic steps of using a manual pallet truck.

The manual hydraulic pallet truck customized by the warehouse pallet truck manufacturer is mostly used in the form of matching the pallet. 20 cm distance. Then pay attention to the 3 gears on the handlebar of the manual pallet jack: up is the lowering function, down is the lifting function, and the center is the neutral gear. When the gear is in neutral, the gear is dialed down, which is the electric pallet lift truck function. Then, adjust the pallet jack handlebar up and down to the appropriate height.

After rising, put the customized pallet truck to the neutral position, pull the handle of the pallet truck with both hands, and drag it to the selected location. At this time, the handlebar of the transporter does not have a electric pallet lift truck, which will become lighter and less laborious. Then move the manual pallet truck gear all the way up until the pallet truck is lowered to the bottom, then adjust the pallet truck to neutral, and pull the pallet truck out with both hands.

The above process is simple and clear, and the operation is simple, so there is no need to repeat it. However, while we are proficient in the daily application of pallet trucks, we should also pay special attention to the custom manual pallet truck manufacturers of storage pallet trucks. After using the pallet, do not press the pallet, and to maintain the lubricating oil once a month or so to improve the Its performance and long service life.

In addition, we also need to know the precautions for the use of manual pallet trucks customized by warehouse pallet truck manufacturers. Before use, it is necessary to know the braking position of the equipment, so that it is convenient to stop in time. Do not stop in an emergency during the operation, so as to avoid the loss of goods due to falling. Therefore, we recommend not to stack high goods on the pallet truck. If the fork is longer than the pallet, it is necessary to support the middle of the pallet to avoid tilting and collapsing during driving, and be more careful when driving.

When driving the equipment customized by the warehouse pallet truck manufacturer, do not drive on the pallet truck with one foot, and observe whether there are pedestrians or vehicles moving around when turning. Overloading is strictly prohibited. If the fault needs to be repaired in time, be sure to operate the manual pallet truck correctly according to the accompanying instructions.