Before using a pallet truck, you must know these things

A pallet truck is a dual-purpose vehicle for loading, unloading and short-distance transportation. It has the characteristics of lifting balance, flexible rotation and convenient operation. It is an indispensable auxiliary tool for material handling and is widely used by enterprises.

Safety check before use

1. Check whether the hydraulic cylinder of the pallet truck leaks oil before use

2. Check whether the hydraulic lifting device of the pallet truck is used before use Effective

3. Before use, check whether the six casters of the pallet truck are entangled with foreign objects and remove them in time if any.

4. If any of the above inspections fail, the use of pallet trucks is prohibited.

Loading

Pallet Truck Fork

Pinch the pressure relief valve on the pallet truck's control handle Go to the down position and press the directional handle up or down to raise the pallet jack forks. Pinch the pressure relief valve upwards and the fork goes down.

Pulling

The weight of the goods must not exceed the weight limit of the pallet truck. After the pallet jack lifts the goods off the ground, turn the pallet jack control handle to the neutral position to drag the goods. Don't run when pulling goods, you need to move slowly.

Pressure Relief

After pulling the goods to the destination, turn the control handle of the pallet jack to the upper position to release the pressure of the pallet jack until the goods fall to the ground.

Dry running

When running empty, the pallet truck should be properly lifted to prevent the front axle support frame from touching the ground.

Safety Instructions

1. The pallet truck can only be operated by one person, and must be commanded by one person when operating by multiple people.

2. When loading the pallet truck, overloading, partial load and single fork operation are strictly prohibited. The weight of the loaded items must be within the allowable load range of the pallet truck. Make sure that the fork length of the pallet truck is greater than or equal to the pallet length. length.

3. Pallet trucks are not allowed to stand for a long time and store items with heavy loads.

4. It is strictly forbidden to drop the goods onto the pallet truck from a height.

5. The pallet truck fork must be completely placed under the shelf to fork the goods and keep the goods stable before pulling.

6. Pallet trucks are strictly prohibited from loading unstable or loosely packaged goods. If necessary, personnel must be arranged to support.

7. When the pallet truck is handling high and low loads, the forks should be lowered as much as possible to prevent the goods from falling.

8. Do not place any part of your body near the mechanical lifting parts of the pallet truck, on the loaded goods and under the forks.

9. When operating the pallet truck, it is strictly forbidden to drive too fast and slow down when turning.

10. It is strictly forbidden to operate pallet trucks on slopes or steep slopes. If the pallet truck needs to be used on a slope, the operator must not stand directly in front of the pallet truck, so as to avoid overspeeding and crashing into people due to the inertia of the pallet truck.

11. Pallet trucks are strictly prohibited from carrying people or sliding freely on landslides.

12. It is strictly forbidden to operate the pallet truck when the operator's sight is blocked.

13. Do not use pallet trucks on muddy and uneven ground. When using the pallet truck, pay attention to the passage and environment and do not hit other people, equipment and other objects.

14. When the pallet truck is not in use, the fork must be lowered to the lowest position without load and stored in the designated location

15. The user of the pallet truck must maintain it regularly. Department managers must schedule regular maintenance or repairs.

16. Damaged pallet trucks must be repaired or scrapped. The use of pallet jacks is prohibited.