Do you know how many centimeters the fork of an electric forklift can be off the ground?

Nowadays, people with electric vehicles on the road are required to wear helmets, but they do not need any relevant driver's licenses. Electric forklifts do not require a driver's license. Normally, as long as they have professional training, they can drive the electric lithium pallet truck stacker for cargo handling. I have worked with stacking, but we must operate electric pallet stacker in a standardized manner, because this is an important guarantee for safety. What are the specifications for the safe operation of electric pallet stacker?

Safe operation of electric forklifts, Precautions for stackers:

1. Electric stacker operators are not allowed to drive after drinking, overweight, or speeding, and are not allowed to brake or turn sharply. It is forbidden for electric forklift stackers to enter the places where solvents and flammable gases are stored.

2. The safety devices of the electric stacker must be complete and complete, the components are sensitive and effective, and the technical performance is good. It is strictly forbidden for the electric forklift to drive with illness. The daily maintenance of each part is carefully checked.

3. Keep the electric forklift stacker in the standard driving state. When the fork is driving off the ground, the fork is 10-20 cm off the ground. When the electric forklift stops, the fork is lowered to the ground height; When the forklift stacker works in poor road conditions, its weight should be appropriately reduced, and the driving speed of the electric stacker should be reduced.

4. When the electric pallet truck stacker is running, if the electric controller is out of control, disconnect the main power supply in time.

5. Special attention should be paid to the timely charging of the battery and the correct maintenance of the battery during the use of the electric stacker.

6. In the operation of the electric forklift-stacker, long-distance acceleration should be minimized. When the electric stacker starts and accelerates, stabilize the acceleration handle. If the road conditions are good, the electric forklift-stacker will continue to accelerate. When the electric stacker needs to decelerate, release the acceleration handle and press the operation handle to make full use of the deceleration energy. If the electric forklift stacker has a regenerative braking function, the deceleration kinetic energy can be recovered. When the stacker electric company goes downhill, do not disconnect the drive motor circuit of the stacker electric forklift. Press the operating handle to put the electric stacker in a regenerative braking state, and use the downward motion of the electric forklift stacker to reduce the energy consumption of the battery.

7. During the operation of the electric lithium pallet truck truck, do not often take emergency braking during high-speed driving; otherwise, it will cause huge friction to the brake assembly and driving wheels of the electric forklift truck. , shorten the service life of the brake assembly and the drive wheel, and even damage the brake assembly and the drive wheel.

The use of electric stackers and electric pallet stacker requires attention to safety. In addition, when it is not applicable, we need to place the forks at a lower position to prevent the cylinder piston rod from being exposed to the air for a long time. Rust; the drive wheels and front wheels of the electric forklift stacker must be free of debris; the power supply is turned off. The use of electric forklifts reduces the work pressure of workers in the factory and improves work efficiency at the same time!