Do you know the advantages and disadvantages of electric pallet trucks with outriggers and without outriggers?

There are many kinds of electric pallet trucks, including four-wheel pallet trucks, three-wheel pallet trucks, and small electric stackers. The electric stacker has legs and no legs:

Advantages of the leg-type electric stacker pallet truck:

1. It can increase the economical type of the electric pallet truck The stability of the body, in professional terms, means that the wheelbase of the front and rear wheels of the electric pallet truck is increased, which makes the economical vehicle of the electric pallet truck more secure and stable when moving forward and backward.

2. It can effectively reduce the weight of the pallet truck; because if the economical electric pallet truck adopts a legless design, then the electric pallet truck must use the lever principle, if it needs to reach a load of 1.5 tons The carrying capacity of the rated size of goods, then the weight of the electric stacker vehicle needs to be at least 1.5T or more to electric pallet lift truck the corresponding goods; but the fork-leg design can well make up for the electric stacker. The shortcoming brought by the lever principle , cleverly extend the fulcrum forward a greater distance in the form of supporting legs, then the economical load capacity of the all-electric stacker and the weight of the body itself can easily exceed the ratio of 1:1; for example, goods with a load of 1.5 tons Then there is no need for the body of the electric pallet truck to be cumbersome to 1.5 tons. Maybe the body weight of the electric stacker is half of that, which is 750kg. 1.5 tons of cargo. It can be seen that the economical design of the fork-leg all-electric stacker has greatly improved the traditional lever principle.

3. The economical fork-leg electric pallet truck can effectively shorten the size of the pallet truck and make the all-electric stacker pallet truck compact and powerful! Because the economical electric pallet truck adopts support legs, the fulcrum moves forward, and the rear only needs to follow some necessary equipment of the electric pallet truck without adding additional counterweight, so the fork-leg all-electric stacker electric pallet The length of the truck body can be effectively reduced.

Disadvantages of the fork-leg electric pallet truck:

1. The economical scope of the fork-leg electric pallet truck has many restrictions: no It is suitable for high-slope environments. Generally speaking, the climbing degree cannot exceed 7°, otherwise there is a danger of the chassis stranded. The economical fork-leg electric pallet truck is not suitable for racks and stacking places where the bottom cannot enter the fork.

2. The economical type of fork-leg electric pallet truck has higher requirements for the pallets used in combination: pallets can be roughly divided into single-sided and double-sided; single-sided pallets are used for the upper panel. To put out the goods, the support column or support bar is below the panel, and the ground is the bottom. The single-sided pallet can also be called a single-layer pallet. The double-sided tray is also called a double-layered tray, which means that there is a panel under the support column on the basis of the single-sided tray, and then the panel touches the ground. Yes; however, single-sided trays can only be used face-up. The economical fork-leg all-electric stacker can only be used with single-sided pallets

There are certain requirements for the height of the pallet. Generally speaking, the economical fork of the fork-leg all-electric stacker is placed in At the lowest point (that is, the fork is placed directly on the support leg), the minimum height is generally 85mm or 90mm; then the height of the pallet used with it must exceed the minimum height of the electric stacker fork before it can be used.

The legless electric pallet truck also has many advantages and disadvantages compared to the fork-leg electric pallet truck:

The advantages of the legless electric pallet truck: Scope of application Compared with the economical type of fork-leg electric pallet truck, the width and grade of climbing are improved to a certain extent, the lowest point of the fork can reach 50mm or even lower, and both single and double-sided pallets can be easily used. Easily adaptable to any stacking requirement.

Disadvantages of legless electric pallet trucks: the use of counterweight blocks makes the electric pallet truck relatively bulky, the body is long and inconvenient to enter a narrow space, the use is not very convenient, weight and size Inconvenient to enter the elevator and other places, the price is more expensive.