Do you know the advantages and disadvantages of fork-leg electric stackers?

Core
The economical type of fork-leg all-electric stacker can effectively reduce the weight of the body, because if the electric stacker adopts a legless design, if it needs to reach the carrying capacity of 1.5 tons of rated size goods , then the weight of the whole electric stacker needs to be at least 1.5T or more to lift the corresponding goods; but the economical design of the fork-leg all-electric stacker can make up for the shortcomings of this lever principle. Extend the fulcrum forward a greater distance in the form of a support leg.

Advantages of fork-leg electric stacker:
1. It can increase the stability of the economical body of the all-electric stacker. In professional terms, it increases the electric stacker. The wheelbase of the front and rear wheels of the machine makes the economical vehicle of the all-electric stacker safer and more stable when moving back and forth.
2. It can effectively reduce the weight of the electric stacker; because if the economical all-electric stacker adopts a legless design, then the electric stacker must use the lever principle, if it needs to reach the rated load of 1.5 tons The carrying capacity of the size goods, then the weight of the electric stacker vehicle needs to be at least 1.5T or more to lift the corresponding goods; but the fork-leg design can make up for the shortcomings of the electric stacker's lever principle. Cleverly extending the fulcrum forward a greater distance in the form of supporting legs, then the economical load capacity of the all-electric stacker and the weight of the body itself can easily exceed the ratio of 1:1; for example, for goods with a load of 1.5 tons There is no need for the body of the electric stacker to be as heavy as 1.5 tons. Maybe the body weight of the electric stacker is half of its dead weight, which is 750kg. tons of cargo. It can be seen that the economical design of the fork-leg all-electric stacker has greatly improved the traditional lever principle.
3. The economical type of fork-leg all-electric stacker can effectively shorten the size of the electric stacker, making the electric stacker small and powerful! Because the economical all-electric stacker adopts support legs, the fulcrum moves forward, and the rear only needs to follow some necessary equipment of the electric stacker without adding additional counterweight, so the fork-leg all-electric stacker is economical. The length of the car body can be effectively reduced.

Disadvantages of fork-leg electric stacker:
1. The economical scope of fork-leg electric stacker has many restrictions : Not suitable for high-slope environments. Generally speaking, the climbing degree should not exceed 7°, otherwise there is a danger of the chassis stranded. The economical fork-leg all-electric stacker is not suitable for racks and stacking places where the bottom cannot enter the fork.
2. The economical type of fork-leg all-electric stacker has higher requirements for the pallets used together: pallets can be roughly divided into single-sided and double-sided; single-sided pallets mean that the upper panel is used for placing The bottom of the panel is the support column or the support rail, and the bottom is the ground. The single-sided pallet can also be called a single-layer pallet. The double-sided tray is also called a double-layered tray, which means that there is a panel under the support column on the basis of the single-sided tray, and then the panel touches the ground. Yes; however, single-sided trays can only be used face-up.
The fork-leg all-electric stacker can only be used with single-sided pallets, because the support feet and forks of the electric stacker enter the gap of the pallet simultaneously, and then the forks of the electric stacker lift the pallet. , and the economical support feet of the fork-leg all-electric stacker are left intact to support the weight of the electric stacker and the goods! Therefore, if it is used with double-sided pallets, it will cause two undesirable results: A. The forks and support legs of the electric stacker cannot enter the pallet gap. B. The forks of the electric stacker enter the pallet space synchronously with the support legs, but the fork lifts the upper panel of the pallet during the economical electric pallet lift truck of the fork-leg all-electric stacker, and the support legs still press the lower panel, causing damage to the pallet or electric stacking. The high machine is damaged or left intact!
3. There are certain requirements for the height of the pallet. Generally speaking, when the economical fork of the fork-leg all-electric stacker is placed at the lowest point (that is, the fork is directly placed on the support leg), its lowest The height is generally 85mm or 90mm; then the height of the pallet used with it must exceed the minimum height of the electric stacker fork before it can be used.

Compared with the economical fork-leg all-electric stacker, the legless counterweight electric stacker also has many advantages and disadvantages:
The legless counterweight electric stacker The advantages of the stacker: a wide range of applications, a certain improvement in the degree of climbing compared to the fork-leg all-electric stacker, the lowest point of the fork can reach 50mm or even lower, and both single and double-sided pallets can be easily used. Easily adaptable to any stacking requirement.
Disadvantages of the legless electric stacker with counterweight: the use of counterweight blocks makes the electric stacker relatively bulky, the body is long and it is inconvenient to enter a narrow space, the use is not very convenient, and the weight and size are inconvenient to enter Elevators and other places are more expensive.