How can electric stackers prevent oil leakage?

How can electric stackers prevent oil leakage? A variety of pads can be handled with care just by doing the following. Such as oil pan or valve cover, due to the large touch area, it is not easy to be compacted, and it is easy to cause oil leakage. If there is oil leakage on the crankshaft oil seal, the lubricating oil will enter the clutch, which will not only consume oil, but also cause the clutch plate to be stained and slipped and burned. Tighten each nut to the repair standard. If the pressure is too loose, the gasket will leak oil; if the pressure is too tight, the metal around the screw hole will bulge or twist the thread, causing oil to leak. Quickly replace the faulty oil seal. Improper oil seal installation, the shaft journal and oil seal edge are not concentric, it is easy to throw oil due to offset; some will lose elasticity due to rubber aging after long-term use, the sealing lip will be damaged, or the self-tightening spring will fail. The oil sealing effect is damaged, and it is easy to be thrown oil. Replace seriously worn parts in a timely manner. For example, the wear of cylinder liners, pistons, and piston rings to a certain extent can cause high-pressure gas in the combustion chamber to escape into the crankcase. Replace the main bearing on time. When the clearance between the main bearing and the journal is too large, the front and rear oil seals will lose their sealing function due to the impact of the crankshaft, causing the oil to flow out from the crankshaft head, or seep oil into the clutch, and then contaminate the friction plates, resulting in slippage and operation failure.

And installed security equipment such as monitoring and infrared alarm. For a long time, the application field of electric stacker was limited to the loading and unloading and handling of palletized goods in factory workshops, enterprise warehouses, logistics distribution centers, general ship cabins, carriages and containers. On the one hand, the surplus of labor in our country makes enterprises choose inefficient human operation methods; on the other hand, various laws and regulations for the safety and security of workers are not perfect, so that enterprises can reduce the cost of using employees to a certain extent. For example, the temporary labor system in previous years. Modern loading and unloading equipment is unacceptable to most small businesses, including many.

Modern handling equipment is unacceptable to most small businesses, including many. Before operating the electric stacker, a comprehensive inspection of the machine should be carried out to check whether the battery is short of water. Once it is found that the water level is not high enough, water should be added in time, otherwise it will affect its correct use and may cause empty burning. The third is to ensure sufficient power when using the all-electric vehicle stack, and pay attention to the power indicator at any time. Once a red light is found flashing, indicating that the power is insufficient, charge it immediately. In addition, in the process of operation, it is necessary to insist on using the machine fork to fork the goods, and it cannot be operated with a single fork. After the machine is used for a period of time, a large amount of dust and impurities will inevitably accumulate in the casing, which should be wiped regularly. Ensuring the cleanliness of the fuselage is conducive to smooth operation. Generally speaking, daily cleaning should be carried out after one month of operation.

.