How can the battery of the battery truck be used to prolong its life?

Before the first use, please check whether the lithium battery in the battery truck is fully charged. To meet shipping requirements, the battery of the pallet jack must be charged before first use if it is not fully charged.

Replacement of lithium battery in battery truck

The lithium battery of battery truck can only be replaced with a battery of the same weight as the original battery model. The weight and size of the battery of the pallet truck cannot be changed at will, otherwise it will affect the center of gravity of the battery truck body. Too heavy or too light batteries will affect the stability and braking ability of the pallet truck.

The battery of a battery truck contains high voltage electricity and energy. Do not create a short circuit. Keep tools away from battery terminals to avoid sparks or short circuits. The power supply should be cut off when the pallet truck is being repaired and maintained.

It is strictly forbidden to smoke or use open flames when charging the battery truck.

To charge the battery of the battery truck, the original charger provided by the manufacturer must be used. Be careful not to undercharge or overcharge, so as not to damage the battery of the pallet truck.

Keep good ventilation when charging battery trucks, especially in enclosed areas. During the charging process, the battery pallet truck may explode when it encounters water, open fire, electric sparks, etc.!

Therefore, the charging power of the pallet jack should be cut off before unplugging the power outlet.

Preparation for charging the battery truck

The battery must be charged as soon as possible after the battery truck is used, and the storage time should not exceed 24 hours. After the pallet truck is parked, press the emergency stop switch and pull out the emergency stop switch key. Unplug the charging plug of the battery truck and insert a suitable power supply (220V 50HZ). Turn on the AC power switch to start charging the pallet truck.