How does an electric pallet truck operate safely?

When the electric pallet truck is in operation, no one is allowed to stand on the forks. When it is really necessary for the auxiliary personnel of the electric pallet truck to work, it should be equipped with a special basket for the electric pallet truck, and the fork should be forked into the special fixed groove under the basket.

If the nature of high-altitude operations is basically non-hazardous work such as inventory and labeling, the driver should not leave the electric pallet truck in order to provide timely assistance; You can choose to wear a good hat and sit in the cab to assist. Unrelated personnel are not allowed to operate the electric pallet truck.

Electric pallet trucks are not allowed to overtake in principle, but when they want to overtake a stopped vehicle, they should slow down and sound their horns, and pay attention to observation.

When driving, the height from the bottom of the fork to the ground should be kept at 150-400mm, the mast must be tilted backward, and the whistle should be heard when there is someone in front.

Do not raise the fork too high when driving; when entering and leaving the job site or on the way, pay attention to whether there are obstacles in the sky; when driving with loads, the fork is not allowed to rise too high, which will affect the stability of the pallet truck .

It is strictly forbidden to turn off the engine and slide when the pallet truck is going downhill, and it is forbidden to brake suddenly while driving without special circumstances.

After unloading, the fork should be lowered to the normal driving position before driving.

When turning, if there are pedestrians or vehicles nearby, the driving signal should be issued first. High-speed sharp turns are prohibited. High-speed sharp turns will cause the vehicle to lose its lateral stability and tip over.

The pallet truck must abide by the traffic rules in the factory when it is running, and must keep a distance from the vehicle in front. When passing the workshop door or intersection, it should be slow, watch, and pass; when stepping on and releasing the accelerator pedal, it should be light When stepping on or changing lifts, do not step on and off suddenly or shake continuously.

When the pallet truck is running, the load must be in a low position that does not hinder the driving, and the mast should be properly tilted back. Do not raise the load except when stacking or loading. The loading height must not block the driver's line of sight. In special circumstances, when objects affect the forward line of sight, drive at a low speed when reversing.

It is forbidden to turn on the ramp, and it is forbidden to perform lifting and forward tilting operations during driving.

The driving speed of the pallet truck in the factory area is 5 km/h, and it must be driven at a low speed when entering the production workshop area.

When the pallet truck is lifting or moving, it is forbidden for personnel to stand on the forks to hold items and play a balancing role.

If problems are found, they will be repaired and reported in time, and they will never work with illnesses or conceal them.