How to charge the battery of the light semi-electric stacker? What should be paid attention to?

The light semi-electric stacker is a kind of manual push-pull walking, and electric electric pallet lift truck is realized. The light semi-electric stacker is suitable for short-distance transportation in factories, warehouses, logistics and other enterprises, and for loading and unloading in areas with little workload. The maintenance of the light semi-electric stacker is relatively simple. The maintenance of the battery in the key components is the top priority. How to charge the battery of the light semi-electric stacker? We understand from the following points.

1. The charging environment of the light-duty semi-electric stacker should be clean and ventilated. When conditions permit, the battery can be taken out or the light-duty semi-electric stacker can be opened.

2. The electrolyte level of the light semi-electric stacker should be 15mm higher than the separator, and below this mark, the electrolyte should be added in time to prevent the battery from running out of power and affecting the light semi-electric stacker. The service life of the battery of the electric stacker, and the temperature of the electrolyte during charging shall not be higher than 45 degrees; The battery will generate a large amount of flammable gas, so prevent fire during the charging process of the light-duty semi-electric stacker; Contact with a lot of soapy water or consult a doctor;

  5. The battery should always be kept clean and dry, and other objects are not allowed on the battery of the light semi-electric stacker ;

  6. The used batteries of light semi-electric stackers should be disposed of in accordance with the national environmental protection law.

  Light semi-electric stacker can generally load 2 tons, and the load will decrease with the load curve when it exceeds 2 meters. After raising 2 meters, the load is 1-1.3 tons, and when it is raised to 3 meters, it can only carry 800 kg. This is related to the load curve. The higher the height, the lower the load. When the light semi-electric stacker exceeds 2 meters, there will be a 'loss of load' phenomenon.

Light semi-electric stackers have load curve diagrams provided by the manufacturers, which should be strictly followed when stacking goods. Don't take chances: maybe, probably, maybe nothing will happen! If it happens, then the injury will be fatal. Therefore, the purchase of light semi-electric stackers must be determined according to the actual use situation! Then it is to choose products that meet safety standards and businesses with reliable after-sales service.