How to deal with the common faults of electric hydraulic trucks?

The application of electric hydraulic truck reflects the fast-paced era of our past and present, which not only saves labor, but also enhances the safety factor in the process of working. However, something unsatisfactory will also happen, that is, common fault disposal such as maintenance and repair of battery truck equipment. Now let's talk about how to deal with the failure of the pallet truck.

The brakes of the electro-hydraulic pallet truck failed. When encountering such problems, the electric link of the controller needs to be repaired by a technician at this time. But there is also another possibility, that is, the brake pads of the battery truck are seriously damaged and need to be replaced.

What should I do if there is a problem with the pallet truck? Then we need to check whether the electric door lock of the electric hydraulic truck is open or damaged, and then check whether the battery pack of the battery truck has electricity. If the battery is low, it needs to be charged quickly.

When the electric hydraulic truck is stuck and cannot advance or retreat smoothly, it may be that the battery power is insufficient and needs to be charged quickly; The screw needs to be tightened as soon as possible; there is another possibility that the DC contactor of the battery truck is out of order, and it needs to be repaired and replaced; however, it is also possible that the controller of the pallet truck is out of order, it is recommended to check first, then repair and replace; if it is electro-hydraulic transportation The motor drive of the car fails, and there will be situations where it cannot move forward or backward. This also happens when the brakes of battery trucks are locked, and the interval between the brake pads of the driving wheels needs to be adjusted.

Assuming that the battery of the electric hydraulic truck is difficult to charge for a short time when it is used, what should I do? If such a situation occurs, it may be because the battery fluid is insufficient, and we need to remove the battery fluid. If the battery is old, please replace it with a new battery as soon as possible. If the power plug and socket are in poor contact, please replace or repair as soon as possible without delay.

In addition, we propose another situation. When the charger of the battery truck does not work, there are two possibilities: one is that the charger does not appear, and the capacitor is blown; The first is that the power light of the charger is on, but the capacitor circuit or resistance circuit is broken, and the rectifier tube is damaged.