loading

Staxx Pallet Truck is a professional warehouse equipment manufacturer and pallet jack supplier in China.

How to operate the electric pallet truck stacker in a safe and standardized manner?

by:Staxx Pallet Truck     2022-06-19

The electric stacker is a special electric vehicle, and the operation does not require a relevant driver's license. Therefore, it is generally possible to drive the electric pallet truck stacker for cargo handling and stacking work after a small amount of training, but it must be Standardize the operation of electric stackers, because this is an important guarantee for safety. What are the specifications for the safe operation of electric pallet trucks?

1. Electric stackers Operators of high-speed vehicles are not allowed to drive after drinking, overweight, or speeding, and are not allowed to brake suddenly or make sharp turns. It is forbidden for the electric pallet truck stacker to enter the place where solvents and flammable gases are stored.

2. The safety device of the electric stacker must be complete and intact, the components are sensitive and effective, and the technical performance is good. Carry out the necessary daily maintenance and carefully inspect all components.

3. Maintain the standard driving state of the electric pallet truck stacker. When the fork is driving off the ground, the fork is 10-20 cm off the ground. When the electric stacker stops, the fork is lowered to the ground height. ; When the electric pallet truck stacker works in poor road conditions, its weight should be appropriately reduced, and the driving speed of the electric stacker should be reduced.

4. When the electric pallet truck stacker is running, if the electric controller is out of control, disconnect the main power supply in time.

5. Special attention should be paid to the timely charging of the battery and the correct maintenance of the battery during the use of the electric stacker.

6. In the operation of the electric pallet truck stacker, try to use as little as possible long-distance acceleration. When the electric stacker starts and the speed increases, stabilize the acceleration handle, if the road conditions are good , the electric pallet truck stacker will continue to accelerate. When the electric stacker needs to decelerate, loosen the acceleration handle and press the operation handle, so that the energy of deceleration can be fully utilized. If the electric pallet truck stacker has a regenerative braking function, the kinetic energy during deceleration can be recovered. When the electric stacker goes downhill, do not disconnect the circuit of the electric pallet truck stacker drive motor, press the operating handle to make the electric stacker operate in the regenerative braking state, and use the electric pallet truck to stack the stacker. The downward kinetic energy reduces the energy consumption of the battery.

7. During the operation of the electric stacker, do not often take emergency braking during high-speed driving; otherwise, it will cause huge damage to the brake assembly and driving wheel of the electric pallet truck stacker The friction will shorten the service life of the brake assembly and the drive wheel, and even damage the brake assembly and the drive wheel.

8. When the electric stacker is not in use, please place the fork to the lowest position to prevent the cylinder piston rod from being exposed to the air for a long time and rusting; Make sure that the drive wheels and front wheels are free of debris; the power is turned off.


The global market was valued at hand pallet jack in battery operated pallet stacker and is expected to reach a market value of staxx pallet truck by hand pallet truck, with a CAGR of +china +electric +stacker during the forecast period.
For more advice on tips, please visit our website Staxx Pallet Truck. Do not hesitate to contact us if you are interested.
Ningbo Staxx Material Handling Equipment Co.,Ltd. affords you a suitable low price for proving our ethical considerations.
Custom message
暂无友情链接数据
Chat Online 编辑模式下无法使用
Leave Your Message inputting...