How to repair electric stackers by electric stacker manufacturers

More and more factories and warehouses have begun to focus on work efficiency and labor saving, so the number of electric stackers has also increased significantly, and the cost savings has made it the darling of our customers. However, any use of equipment will involve maintenance and repair problems. Regarding the use of stackers, most of us will care about the forks and support feet. In this regard, the electric wholesale manufacturer of stacker trucks would like to share with you some maintenance methods for the forks and support feet of stacker trucks.

Let's take a look at the data: the level difference between the two forks of the electric stacker is more than 5mm, the length difference is more than 10mm, the wear in the length direction of the fork is less than 40mm, and the front end of the fork is worn The fork is bent and deformed, and the angle between the fork surface and the fork arm is greater than 90°. If you encounter this situation, the electric stacker manufacturer recommends that you disassemble or repair it, thinking that this will seriously affect the service life of the equipment.

Check whether there are cracks or open welding at the upper and lower fork iron welding places. If there is any defect, it should be repaired by welding immediately.

The electric wholesale manufacturer of stacker trucks specially reminds that there should be no cracks or traces of welding at the welding position, and the deformation of the beam should not exceed 2mm. If the protective frame is welded or deformed, it should be repaired and rebuilt immediately. welding.

When the rack and the fork are loaded on the carriage, the upper plane of the two forks of the electric stacker should be kept in the same plane, and there should be no height or dislocation. question. For the force position of the fork arm and the fork surface, it is necessary to check whether the rack is damaged. If there is a crack, the electric wholesaler reminds the responsible personnel to deal with it in time.

Install the rack and fork, and choose the thickness and length of the fork to be almost equal. The standard for the opening size of the upper and lower forks of the electric stacker pallet truck is 27mm, and the lower limit of use is 29mm. If this lower limit data is exceeded, the electric stacker manufacturer recommends immediate maintenance and should not be careless.

Xinniudun electric stacker electric wholesale manufacturer specializes in the production and sales of electric stackers, manual stackers, electric four-wheel pallet trucks, pallet trucks and other storage equipment, welcome to you Call for advice.