How to use and maintain manual pallet trucks

How to use a manual pallet truck

There are many common names for manual hydraulic pallet trucks. Some people call it, ground cattle, hand pallet truck, and even some people call it ant truck, etc. The method of use is also very simple. , but today the editor brought you a wave of benefits, very vivid and detailed illustrations of the parts and usage skills of the manual hydraulic truck, the novice friends are blessed.

Factory workshops and warehouses are used to transport goods. Manual trucks are generally used for short distances. The standard load of this truck introduced today is 2 tons. It is the most commonly used specification and style in warehouses. It is used by users. It is a bit old, but not Affect. As shown below:

1. The most common way of using manual hydraulic trucks is to cooperate with pallets. This time the pallet is a rectangle. It is necessary to insert the truck from the large side of the pallet, leaving a distance of 20cm.

2. There are three gears on the handlebar of the manual hydraulic truck, up is down; down is with lifting function; center is neutral, at this time, dial the gear down, with lifting function. As shown below:

3. Next, press the handle of the truck up and down to raise it to a suitable height, as shown in the figure below:

4. After the electric pallet lift truck, turn the truck to the neutral position. At this time, the handle of the truck does not electric pallet lift truck, which is very light and labor-saving. Pull the handle of the truck with both hands and drag it to the designated position.

5. At this time, move the gear of the manual pallet truck upwards and not let go until the lithium pallet truck is lowered to the bottom position, then adjust the forklift to neutral, and pull the lithium pallet truck out with both hands.

The whole process is clear at a glance, without much introduction, we can deeply understand the daily use of manual hydraulic trucks. Just need to pay attention that the manual truck should not press the pallet after entering the pallet, and it needs to be maintained with lubricating oil for about a month in order to improve its performance and prolong its life.

Maintenance method of manual pallet truck

When the manual truck is not in use, it should be lowered to the bottom and put on a tool that can be parked. Employees are not allowed to play and use it at will. During use, pay attention to check the signs and precautions attached to it to prevent loss.

If there is damage to the parts of the manual truck, you must contact the manufacturer to cooperate with the original parts of the relevant stores when replacing them, and do not modify them without permission to avoid future freight accidents.

Every five months or so of the truck, pay attention to the condition of the hydraulic oil, add hydraulic oil appropriately, and maintain the carrying capacity and good handling performance of the truck.

In the process of using the manual truck, due to the continuous pressure rising and falling, air may enter the pump body. After entering the air, the fork will not rise when the handle is pressed. You can remove the air by pressing the handle wrench back and forth, and then move the handle , reciprocating empty play several times.

It is unavoidable to wear the related parts of the manual pallet truck, especially the related wear parts such as seals and wheels. Pay attention to replacing them in time. You should also check in time whether there is cotton cloth, iron wire, etc. wrapped around the wheels during the handling process, which reduces the rotation of the wheels. speed and keep the truck in good handling condition.

In the daily use process, if there are no other problems, after a month or two of use, you can add some lubricating oil to keep the truck in good condition during the handling process, and also bring a great sense of ease for manual handling.