Learn more about the safety operating procedures of electric pallet stacking forklifts

1. Only trained and approved operators are willing to control the forklift.

2. Whenever a problem occurs, the forklift is forced to stop, hang the symbol of 'danger' or 'problem' on the vehicle, and have to release the keys, and at the same time give a speech to the employees. Only use the forklift after the problem is eliminated.

3. When charging, put up a sign: 'No beacon is allowed.' Charging in good places with good ventilation. When charging, open the cover and open the battery cover to release explosive gas.

4. When the charger is used, the shell needs to be reliably grounded. Pay attention to the positive and negative poles of the charging plug. Do not unplug the power switch or battery plug during charging, otherwise the plug and electrical components will be damaged. Often press the stop charging button on the charger before unplugging the plug.

5. Fire extinguishers should be equipped for employment occasions.

6. Regular inspections of oil and liquid leakage, deformation, and looseness, etc., will reduce the life of the vehicle and cause incidents under vicious conditions.

7. The employment road should be flat concrete or consistent ground, and it is not allowed to drive on skewed and uneven roads. Rectify the work site, clear out obstacles, drive away gravel, sand, and wipe off oil and water stains.

8. Before handling, familiarize yourself with the graph on the load curve plate, which expresses the relationship between the rated load and the distance between the load. Overloading is strictly prohibited.

9. Sound the horn before starting to ensure that no one is outside.

10. Not agree that the goods deviate from the middle of the fork. When the goods deviate from the middle of the fork, turn or pass through uneven roads, they simply fall down. At the same time, the possibility of overturning increases.

10. Do not agree to make sudden opening, emergency stop, and sharp turns.

11. Do not allow the fork to operate the lithium pallet truck in the high position.

12. When the goods are loaded too high and the line of sight is used, there should be a guide or let the goods run afterwards.

13. In view of the small wheels of the pallet stacking forklift, the truck cannot run on a horseback road, and only operates on specific stacking occasions.

14. People are not allowed to get up or walk under forks or attachments. No one is allowed to get up on the fork. Do not allow your head, hands, feet, or body to reach between the forks and the front legs. Once caught, life will be dangerous. No hand is allowed to reach between the front and back door frames.

15. The load uphill should make the goods move forward. Turning maneuvers on ramps are strictly prohibited. Otherwise, there is a danger of overturning. Prevent work on ramps.

16. There is a rubber drain plug at the bottom of the battery, which does not need to be opened under normal circumstances. After each charging or filling of electrolyte, open the side panel of the battery, pull out the battery, place a container under the drain plug, open the drain plug, and drain the remaining liquid.

17. Do not allow the battery to be charged until the stacker cannot be moved. This will reduce the battery life. When the dual flashing lights of the battery indicator are flashing, please charge it immediately.

18. Check the electrolyte level once a week. When the electrolyte level is low, add distilled water to the specified level. The electrolyte is 15-20mm higher than the protection sheet.

19. The acid in the battery is corrosive. When manipulating the battery, wear protective clothing and goggles.