Pay attention to these points in operation and application of scissor aerial work platform

Now more and more aerial work platforms are recognized and widely used in China. Together with the convenience of working at heights, we have to face some safety hazards. In the daily use process, the main points should also be done well, such as checking before use, monitoring during use, and maintenance after use. In the process of use, the following points should be controlled: 1. The operator must participate in the prevention of falling Training in the use of protection and lift trucks will enable you to start operating the equipment. 2. There should be a label on the body of the scissor aerial platform stacker, indicating the following: the lifting speed limit of the elevator, the rated load capacity, the maximum lifting height, the name of the manufacturer, and the date of production, etc. 3. The installed electric pallet lift truck shall be inspected by the on-site safety engineer before being put into use, and be put into use only after hanging the permit for use. 4. It is necessary for the operators of the lift truck to check the lift before using it every day and fill in the check form. 5. The operator of the scissor-type aerial work platform must operate in accordance with the operating regulations of the electric pallet lift truck truck. 6. The work area must be on open and flat ground, and it is not allowed to operate on uneven ground. 7. The channel outriggers must be fully opened and supported firmly. 8. When the channel is in the rising starting position, the operating personnel cannot leave. 9. It is necessary for personnel using scissor-type aerial work platforms to wear full-body safety belts. During the lifting process, attach the seat belt to the channel, the basket or the attachment point made by the manufacturer. When the scissor-type aerial platform stacker is raised to the working height, the safety belt is no longer tied to the channel, and should be tied to other structurally reliable hanging points. If there is no secure hanging point, steel ropes should be used to hang on the steel beam Or on the concrete beam, and fasten the seat belt to the wire rope loop. 10. The channel operation area must be protected with warning tapes, warning signs, and full-time guardians.
There are a lot of businesses today that are very much in demand and one of them is a pallet stacker truck.
Ningbo Staxx Material Handling Equipment Co.,Ltd. will continue to bring our industry nuances of style and approaches to pallet stacker truck which are consistent with our evolving aspirations.
pallet stacker truck has a great positive reflects from our dear customers.