Precautions before storing electric hydraulic pallet trucks

Electric hydraulic pallet trucks are widely used in warehouses, workshops and other fields, providing people with a lot of convenience. But when we use the equipment, we should pay attention to the maintenance of the equipment. We can't leave the equipment alone after use, because there is still maintenance work waiting for us to do before it is stored. How to do it? Take a look with.

The first thing to do is to thoroughly clean the electric hydraulic pallet truck, check the brakes, and the hydraulic oil level. If the amount of hydraulic oil is low, add hydraulic oil as needed. If there are mechanical parts without surface coating, it is suggested that a thin layer of lubricating oil or grease must be applied to the surface to lubricate the electric stacker, and the battery should be charged regularly.

Unplug the battery when charging, clean the battery, and apply special grease on the motor bolts. If the electric hydraulic pallet truck is not used for more than 2 months, it is recommended to store the stacker in a dry space free of frost and moisture. During this process, the stacker should be supported with brackets, and all wheels should be off the ground to avoid loss of wheels and wheel bearings during storage.

If there is a problem with the switch of the electrical system, it is recommended to spray the contact spray on the exposed contact surface and remove the contact surface of the operating element by repeating the switching operation several times oxide layer. After the electric hydraulic pallet truck is put into use, the driver needs to repeatedly test the braking performance to ensure that it is correct.

It is very important to ensure the safety of the charging room when charging the electric hydraulic pallet truck produced, otherwise gas will enter the battery and cause the wrong extension cable to be connected to the charging device. Damaged connecting cables are short-circuited, increasing the risk of crash damage. Therefore, we have to learn about the maintenance of the battery room of the electric hydraulic pallet truck.

Preventative preparations should be made first, and staff should wear protective equipment, including face shields, acid-resistant gloves, slippery, toe-protecting acid-resistant shoes, goggles, sufficient fire extinguishers and neutralizers, etc. Have eyewash and shower system. When the battery is charged, gas will be generated, and this part of the gas may be harmful to the human body, so the electric hydraulic pallet truck thinks that a good exhaust system should be installed, and then ask a professional hygienist to evaluate the situation. Safety is a top priority at all times, which is why we are required to be foolproof.