Precautions for the use of semi-electric stackers - pallet trucks

1. Please read the instructions carefully before using the semi-electric stacker. If necessary, please call the technician.

2. Arbitrary disassembly and assembly are prohibited, and repairs by non-professionals will reduce the safety factor of the stacker.

3. After use, please maintain it according to regulations.

4. For unloading, please lower the fork to the lower position to move the semi-electric stacker. Be careful not to injure people on the job site.

5. Do not stand on the forks of the semi-electric stacker.

6. After the semi-electric stacker is used, do not leave the stacker at the job site.

Hydraulic equipment supports non-standard customization

EquipmentElectric Pallet TruckElectric StackerLifting PlatformPallet TruckPallet TruckTrail Type Lifting Elevator

7. The load is also related to the height of the fork and the position of the center of gravity. Please refer to the vehicle curve diagram, the markings on the vehicle body must be kept clear at all times.

8. Do not use semi-electric stackers on other occasions except for lifting goods. If the stack is damaged, it can be repaired locally according to the relevant instructions.

9. The operator must be an adult and be able to take responsibility for his actions.

10. If you are operating a semi-electric stacker for the first time, please follow the operating procedures, first do no-load adaptive training in a relatively empty area, and after you have basically mastered the performance of the vehicle, To be practical, please believe in yourself. Brave operation, the semi-electric stacker is also easy to master.

11. Please wear appropriate work clothes during operation, maintenance or repair.

12. The load of the semi-stacked high-vehicle should be placed smoothly, the center of gravity of the heavy object should be at the center of the two forks, within 600mm from the fork back, the lifting load weight should be within the allowable range of this parameter, and the carrying weight should be The load curve diagram on the label should be referred to, and it is prohibited to use it beyond the range.

13. The semi-electric stacker should stop moving when it goes up and down. When the electric stacker is ready to travel for a long distance, the fork should be lowered to a lower position.

.