Routine inspection before safe operation of electric stacker

The inspection of the electric stacker before use is very important for the safety protection of the operation of the electric stacker, and this work cannot be ignored. There are the following factors for the inspection of the electric stacker before the operation.

1. Before checking your electric stacker, please carry out the following operations:

a. Park the electric stacker on a flat and stable place

b. Stop the engine, pull on the handbrake, and set all operating handles in the neutral position.

c. Let the mast avoid the horizontal plane from being vertical, put down the fork, and let the fork avoid ground collision.

2. Check the following factors:

a. Go to the electric stacker to check whether there is any sign of oil leakage or water leakage.

b. Check whether the tire pressure is normal, whether the tread is scratched, whether the steel ring is deformed, contused, and whether the screws are tightened.

c. Check whether the rear support frame and the fork are deformed or cracked, and whether the positioning of the fork is normal. Check the mast chain for tightness. Check whether the lamp system is damaged and whether the canopy is deformed or cracked.

d. Open the engine cover and check the cooling water capacity. Check engine engine oil capacity. Check the fan belt for cracks and wear.

Check battery electrolyte capacity. Check hydraulic oil capacity. Check brake fluid volume. Drop the hood, load up the car, and get in the seat. Adjust the seat to the proper position. Adjust the tilt angle of the steering wheel to the most suitable position. Check whether the speaker function is normal. Try stepping on the brake pedal to see if it is normal. Try stepping on the accelerator pedal to see if it is normal. Try stepping on the clutch pedal to see if it is normal. (Manual transmission model) Try stepping on the jog pedal to see if it is normal. (Automatic transmission models) Check whether the hand brake lever is operated normally.

It can be seen from the above that the inspection work requires dozens of items, which is a careful matter. However, safety protection is the most important. If the electric stacker has an accident, the damage will be great. In order to maximize safety protection and minimize danger, the technology expects electric stacker operators to pay more attention to pre-work inspections.