Tell you about the work safety requirements of electric forklifts

is a product that is widely used in logistics and warehouses. No matter what kind of vehicle it is, it needs to pay attention to some safety during use. Let the electric pallet truck manufacturer tell you what are the work safety requirements for electric pallet stacker? If there is a problem with the electric pallet truck, it needs to be repaired at the maintenance point. Frequent failures will affect the normal work, so how should we reduce the maintenance rate of the forklift.

1. drivers equipped with an electric pallet truck driver's license to prevent multiple drivers for one forklift.

2. It is strictly forbidden for people to stand up and down the fork, and it is not allowed to use a single fork to pick up high and overloaded goods.

3. Overhead guards and racks must be complete and effective.

4. The connection part between the hoisting cylinder and the gantry should be reliable, the hinged connection between the tilting cylinder and the gantry and the frame should be reliable and sensitive, and the matching clearance should not be too large. The oil cylinder should be well sealed, without cracks, and work smoothly. Under the rated load, the 10min gantry self-sinking amount is not more than 20mm, and the inclination angle is not more than 0.5°. When fully loaded, the lifting speed should not be lower than half of the specified value.

5. The fork frame shall not be severely deformed, and the welding seam shall be de-soldered. There shall be no cracks or welds on the surface of the fork. Songshan Lake forklift rental, the fork root angle shall not be greater than 93°, and the thickness shall not be less than 90% of the original size. The height difference between the left and right fork tips shall not exceed 3% of the length of the fork level section. The positioning of the fork should be firm, the supporting surface and positioning surface of the fork hook should not have obvious defects, the matching gap between the fork and the fork frame should not be too large, and the movement should be smooth.

How to reduce the lithium pallet truck maintenance rate?

First of all, we need to standardize the operation of the lithium pallet truck. The gantry of the lithium pallet truck truck shall not be deformed or the welding seam is de-soldered. The rolling gap of the inner and outer gantry shall be adjusted reasonably and shall not be larger than 1.5mm. The wear amount of the wheel groove shall not be greater than 10% of the original size. The tension of the two hoisting chains should be uniform, and should not be distorted and deformed. The ends should be connected reliably. The pitch of the chains should not exceed 4% of the original length, otherwise the chains should be replaced. Sprocket roll should be responsive.

In fact, it is important to reduce the maintenance rate of electric pallet stacker, because the fork frame must not be severely deformed, and the weld seam will be de-welded. There shall be no cracks or welds on the surface of the fork. The root angle of the fork shall not be greater than 93°, and the thickness shall not be less than 90% of the original size. The height difference between the left and right fork tips shall not exceed 3% of the length of the horizontal section of the fork. The positioning of the fork should be reliable, the support surface and positioning surface of the fork hook should not have significant defects, the cooperation gap between the fork and the fork frame should not be too large, and the movement should be smooth. In the process of using the forklift, we must pay attention to its maintenance to prolong its service life.