The use points of the 6 wearing parts of the all-electric stacker pallet truck

The use points of the 6 wearing parts of the all-electric pallet truck

When the all-electric pallet truck is purchased, the warranty will generally be indicated The wearing parts are not guaranteed; what are the wearing parts of the stacker? Today, Linggong pallet truck will share with you what are the consumable parts of the stacker?

Drive Wheel - AC

1. Wheels

The wheels of the stacker are generally made of polyurethane, nylon, and rubber; among them, polyurethane is wear-resistant , The quality is soft and is widely used. Nylon wheels are generally suitable for manual stackers or semi-electric stackers because of their light weight and high hardness. The usage rate of rubber wheels is not very high, and it is generally only used for the special needs of users. The wheels must be worn because they move on the ground, so the general manufacturers sell stackers without warranty. Even if it is a warranty, it generally only provides three guarantees for 3 months or 6 months!

.

2. Carbon brush - carbon brush for lifting hydraulic motor

carbon brush

motor carbon brush has always played a role in contact , but just like a pencil, it wears out all the time, so it is an inevitable trend to wear it out. However, generally speaking, the carbon brushes of the motor can be used for three to five years once replaced, so although they are wearing parts, the frequency of replacement is not high!

3. Battery

At present, the batteries of electric stackers are generally lead-acid batteries; the chemical reaction inside the battery generally has an active cycle, and the general plastic shell The starting battery can only be used for 1-2 years. The battery pack in the iron case can generally be charged and discharged 700 times, and it can be used for almost 3 years under normal conditions. Of course, better batteries, such as imported batteries, can be charged and discharged 1500 times. BYD iron batteries claim to be able to charge and discharge more than 3000 times. It is estimated that the pallet trucks have been scrapped at that time, and the batteries can continue to be used. Let's work. When the manufacturer sells the stacker, the warranty period given by the general battery is also 3-6 months!

4. Bearings

Most of the bearings are installed inside the wheel. Once the wheel is replaced, many of the bearings cannot be knocked down, so they are scrapped. In addition, because bearings are always wear parts, they are basically not covered by warranty. However, generally good bearings can be used for three to five years without problems, and imported bearings can be used for more than ten years.

Lifting cylinder oil seal

5. Oil seal

The oil seal generally acts on the piston rod of the hydraulic cylinder and plays a sealing role. With the long-term friction of the piston rod, it is only a matter of time for the oil seal to wear off, so generally speaking, the oil seal is not guaranteed.

6. Shell - 460 electric pallet truck cover

plastic shell

As for this plastic shell, it is basically caused by human operation bumps and bumps Damage, of course, the probability of this happening is still very large, so the manufacturer also lists it as a wearing part and does not provide three guarantee services

Summary

All-electric stacker pallet truck In general, wearing parts are those things that have been wearing out, and are things that cannot be solved at the current technical level, such as carbon brushes, batteries, etc. Of course, these fragile accessories are also accepted by most people!