Basic steps to use a custom manual pallet jack

Manual pallet trucks have been widely used in the market. Some large supermarkets, factories, and logistics commonly used handling equipment, electric hydraulic trucks, and manual hydraulic trucks are a good choice. Program. The electric hydraulic truck saves time and effort, and effectively improves labor efficiency. The manual pallet truck is small and flexible, and it is more handy when moving goods. But no matter it is an electric hydraulic pallet truck, attention should be paid to the operation steps. So what are the specific steps?

Customized manual hydraulic pallet trucks are mostly used in the form of pallets. When using, the pallet truck should be inserted from the large side of the pallet, leaving a distance of 20 cm. Then pay attention to the 3 gears on the handlebar of the manual pallet jack: up is the lowering function, down is the lifting function, and the center is the neutral gear. When the gear is in neutral, the gear is dialed down, which is the electric pallet lift truck function. Then, adjust the pallet jack handlebar up and down to the appropriate height.

After ascending, put the customized truck to the neutral position, pull the handle of the truck with both hands, and drag it to the selected location. At this time, the handlebar of the transporter does not have a electric pallet lift truck, which will become lighter and less strenuous. Then move the manual pallet truck gear all the way up until the pallet truck is lowered to the bottom, then adjust the pallet truck to neutral, and pull the pallet truck out with both hands.

The above process is simple and clear, and the operation is simple, so there is no need to repeat it. However, while we are proficient in the daily application of pallet trucks, we should also pay special attention to not pressing the pallets after using the pallets for customized manual pallet trucks, and to maintain lubricating oil once a month or so to improve its performance and longevity. service life.

In addition, we also need to understand the precautions for the use of custom manual pallet trucks. Before use, it is necessary to know the braking position of the equipment, so that it is convenient to stop in time. Do not stop in an emergency during the operation, so as to avoid the loss of goods due to falling. Therefore, we recommend not to stack high goods on the pallet truck. If the fork is longer than the pallet, it is necessary to support the middle of the pallet to avoid tilting and collapsing during driving, and be more careful when driving.

We've said that trucks can't be overloaded and eccentric, so don't drive with one foot on the forks when driving electro-hydraulic trucks and manual pallet trucks. There is a problem to be repaired in time, we should operate in strict accordance with the operating requirements.