Battery antifreeze skills of semi-electric stacker in winter

The weather is getting colder, and the temperature in some areas has even reached below zero. Therefore, for these friends, the antifreeze work of forklifts still cannot relax their vigilance. Semi-electric stackers are more commonly used in the storage industry. Although semi-electric stackers have simpler accessories than electric four-wheel and other heavy-duty forklifts, the antifreeze work cannot be ignored, especially the batteries of semi-electric stackers. Do a series of antifreeze work to ensure that the equipment can be used without obstacles, while ensuring work efficiency, it also prolongs the service life of the equipment, thereby achieving the purpose of saving operating costs. Next, the storage forklift manufacturer will take you to learn some tips about anti-freezing the battery of the semi-electric stacker.

1. Pay attention to the work of keeping the battery warm in cold weather

Speaking of the antifreeze of the battery, we have to talk about the heat preservation work of the battery. The battery is the core power component of the semi-electric stacker, and the performance of the battery is closely related to the temperature. Storage forklift manufacturers recommend keeping the working environment temperature of the battery at around 25°C. When the temperature is low in winter, friends who have the conditions must store the semi-electric stacker in a room with a suitable temperature.

2. Fully charge the battery immediately after use

When the weather is cold, once the power of the semi-electric stacker is found to be exhausted, it should be charged in time, and it is absolutely necessary to avoid using it at a loss of power. If conditions permit, the storage forklift manufacturer reminds everyone to keep the battery of the semi-electric stacker fully charged, so as to avoid running out of power in the middle of the work, and it will not affect your work progress and cause unnecessary troubles. When charging, separate the charging circuit from the chopper to avoid affecting charging. Moreover, the overvoltage generated by the charger will damage the chopper, and the wiring from the battery to the electronic control should be arranged in parallel, as short as possible.

3. The battery should be waterproof and moisture-proof

When the semi-electric stacker enters the room from the outside, when the battery surface suddenly brings cold air to the warm room, frost will appear on the surface. Therefore, it is necessary to do a good job of waterproofing and moisture-proofing the battery to prevent battery damage. In addition, regularly clean the dust inside the DC motor, check whether the carbon brushes and springs are normal. The battery is the core of the semi-electric stacker, so it is necessary to add distilled water in time.