Daily maintenance points of battery of electric stacker pallet truck

The daily maintenance points of the battery of the electric stacker pallet truck

The electric stacker pallet truck uses the battery as the energy source to drive the lifting motor to electric pallet lift truck, drive the walking, The controller regulates the speed of the vehicle and the steering wheel. Therefore, the operation and maintenance of battery pallet trucks and electric stacker batteries are closely related to the use, maintenance and service life of pallet trucks.

It is necessary to check whether the electrolyte of the electric pallet truck is sufficient every day. When the liquid level is lower than the rated value, the battery will be heated and damaged due to too little electrolyte, making it difficult for the battery to be fully charged. Thereby shortening the service life of the battery. The operation of the electric pallet truck may contaminate the surface of the battery. Always pay attention to keep the surface of the battery clean and dry. If it is not too dirty, you can wipe it with a damp cloth. The acid mold in the battery is wiped clean, then washed with water and allowed to dry naturally. Dirty battery surface will cause leakage. It is necessary to frequently check the battery terminals, wires, covers and other places that are easy to observe, whether there is corrosion caused by oxidation at the joints of the terminals and the connection with the wires, and check whether the cover is deformed and whether there is heat, and eliminate the problem in time.

The operation of adding water to the battery of the electric stacker pallet truck: add distilled water according to the specified liquid level and measure it with a standard nuclear scale. Do not add too much water to prolong the water-adding interval. Too much distilled water, adding too much water will cause the electrolyte to overflow and cause leakage. Under normal circumstances, it is strictly forbidden to add dilute sulfuric acid.

Charging the battery of the electric lithium pallet truck: the battery will generate gas during the charging process. The charging place should be well ventilated, and there is no open fire around. make an impact. Unplugging the charging plug during charging will create an arc, so turn off the charger before unplugging. After charging, a lot of hydrogen will remain around the battery, so no open flames are allowed, and the cover on the battery should be opened for charging. Otherwise there is a danger of explosion. Avoid overcharging and overdischarging the battery as much as possible. Battery overcharge and overdischarge can seriously affect battery performance and life.

Maintenance of binding posts, wires and covers must be carried out by professional technicians designated by the manufacturer. If the semi-electric stacker is not used at intervals, the battery must be fully charged.

Storage of the battery of the electric lithium pallet truck must be stored in a ventilated and cool place for safekeeping. It cannot be short-circuited; a short-circuit caused by rain may cause a fire and may generate a small amount of hydrogen gas. For waste batteries, they should be stored in accordance with the storage method of batteries, and it is not easy to throw them away.