Fuel forklifts (internal combustion forklifts) are different from electric forklifts. Electric forklifts use electricity as the power source. As long as the battery is powered and the circuit and motor are normal, they can be started. However, internal combustion forklifts are different. The weather is too cold or overheated. The failure caused the fuel forklift (internal combustion forklift) to fail to start. manufacturers will tell you: There are many reasons for the difficulty of starting fuel forklifts (internal combustion forklifts), but there are two main reasons: 1. Caused by the failure of the fuel supply system 2. Caused by the failure of the air supply system 1. Common faults and solutions 1. The diesel filter is blocked, the oil circuit or the diesel filter of the internal combustion forklift is blocked; there is air in the oil circuit. Solution: Clean the blockage and remove the air in the oil circuit. 2. The fuel injector of the internal combustion forklift does not supply fuel or the pressure is insufficient, poor atomization, oil dripping, etc.; the plunger adjusting arm or the gear rod lug comes out of the fork groove of the speed control lever in the non-fuel position; the fuel injection pump column of the internal combustion forklift The plug and couple parts are severely worn, the oil supply pressure is too low, the delivery valve is severely worn, and the seal is not tight; the gasket is cracked and deformed, the delivery valve spring is broken, and the fuel injector is worn and stuck in the closed position. Solution: It is found that the plunger adjusting arm or gear lug has come out of the speed control rod groove, and the internal combustion forklift fuel injection pump should be disassembled and reinstalled correctly; at the same time, check whether the fork groove is excessively worn, if the plunger is found to be stuck in the stop position , The internal combustion forklift should be disassembled for repair or replacement; if the fuel injection of the internal combustion forklift is weak, check whether the plunger pair is severely worn and the return valve gasket is worn; disassemble the fuel injector and check whether the needle valve assembly is stuck in the closed position, Whether the needle valve and the fuel injection hole are burnt, repair or replace the mating parts according to the inspection results.
Ningbo Staxx Material Handling Equipment Co.,Ltd. highlighted the need to foster a human openness to technological innovation.
Ningbo Staxx Material Handling Equipment Co.,Ltd. is one of China's biggest providers in the following categories of products: pallet stacker truck
, +pallet +truck +manufacturer, semi electric pallet stacker,etc. We also welcome ODM and OEM orders, and offer the highest standards of service, the cheapest deals, and the best buying experience. Get to know us at Staxx Pallet Stackers.
We want to be careful and deliberate about developing Staxx, from the platform we choose, to the way we approach it, to the methods we use.