loading

Staxx Pallet Truck is a professional warehouse equipment manufacturer and pallet jack supplier in China.

How to choose a semi-electric stacker

by:Staxx Pallet Truck     2023-03-24

1. The weight of the goods

The standard load of semi-electric stacker is mostly 1T, 1.5T, 2.0T, and the lifting height is divided into 1.6m, 2.0m, 2.5m, 3.0m, 3.5m, 4.0m, so the price is also very different. The higher the payload and lift height, the more expensive it will be. Generally speaking, the price is more than 10,000.

2. Lifting height of the fork

The height of the fork lift depends on the requirements of the shelf and the use environment. For example, the need for an elevator, the size of the elevator, and others. There is also the height of the warehouse door. The height of the mast can be customized with the electric forklift manufacturer. If one or two masts are too high, then a three-section mast can be customized.

3. Right-angle stacking aisle width

To put it simply, it is the safe aisle width that the semi-electric stacker can turn 90 degrees in the aisle. The placement of most warehouse shelves is carefully calculated to maximize the number of shelves in a limited space and place more goods. This involves the problem of the semi-electric stacker turning at a right angle between the shelves. The width of the right-angle stacking channel of the semi-electric stacker is calculated from the vehicle design parameters: the width of the right-angle stacking channel = turning radius + front overhang + length of fork/pallet + safety gap (leave about 20cm before and after the safety gap ).

3. Pallet size

This is especially important for users who already use a lot of pallets. The specifications of the pallet will also affect the selection of the semi-electric stacker. The pallets applicable to the semi-electric stacker are single-sided pallets. When purchasing a semi-electric stacker, there are other points that we need to pay attention to. For example, the height of the customer's container that needs to be exported should be higher than the height of the semi-electric stacker; users who work in three shifts, When purchasing a semi-electric forklift, you should also consider whether to distribute another battery; after the goods are lifted to a certain height, the rated load of the semi-electric forklift is unloaded, that is, the load curve; special industries, such as very low temperature For cold storage, the requirements for semi-electric stackers will be higher; if the car is to work on the floor, it must be considered how much weight the floor can bear per square meter; there is also a problem of the road surface that needs to be considered, the customer's road surface is uneven, Slopes are a great wear and tear on the wheels and motors of the semi-electric stacker.

Custom message
暂无友情链接数据
Chat Online 编辑模式下无法使用
Leave Your Message inputting...