How to deal with common faults of electric hydraulic pallet truck?

The application of electro-hydraulic pallet trucks reflects our fast-paced era, which not only saves labor, but also enhances the safety factor during the work process. However, there will also be some unsatisfactory things, that is, the maintenance and repair of battery truck equipment and other common troubleshooting. Now let's talk about how to deal with the failure of the pallet truck.

The brake of the electrohydraulic pallet truck failed. When encountering such problems, such as the problem of the electric connection of the controller, it is necessary for technicians to overhaul the control system. But there is another possibility, that is, the brake pads of the battery truck are severely damaged and need to be replaced.

What should I do if there is a problem with the pallet truck? Then we need to see if the electric door lock of the electric hydraulic truck is open or damaged, and then check whether the battery pack of the battery truck is charged. If the battery is low, it needs to be charged quickly.

When the electro-hydraulic pallet truck freezes and cannot move forward and backward smoothly, it may be that the battery is insufficient and needs to be charged quickly; another possibility is that the switch of the walking control mechanism is loose, and the screws need to be tightened as soon as possible; another possibility is that the battery pallet truck If the DC contactor of the pallet truck fails, repair and replace it; however, it may also be due to the failure of the controller of the pallet truck. It is recommended to check first, then repair and replace it; if it is the motor drive failure of the electrohydraulic pallet truck, it will also fail to move forward or backward. Condition. This will also happen when the brakes of the battery truck are locked, and the distance between the brake pads of the driving wheels needs to be adjusted.

What should I do if the battery of the electro-hydraulic pallet truck is short and difficult to charge? In such a situation, it may be because the battery fluid is insufficient, and we need to remove the battery fluid. If the battery is old, please replace it with a new battery as soon as possible. If the power plug and socket are in poor contact, replace or repair it as soon as possible without delay.

In addition, we propose another situation. When the charger of the battery truck does not work, there are two possibilities: one is that the charger does not appear, and the circuit breaker is blown; the other is that the power light of the charger It is bright, but the capacitor circuit or resistance circuit is open, and the rectifier is damaged.