How to maintain and maintain the semi-electric stacker?

When we use the semi-electric stacker, we must pay attention to the maintenance and maintenance of the vehicle, which is very necessary. Once we ignore this process, there is a high possibility of endangering personal safety and damaging property. Therefore, the semi-electric stacker manufacturers call on us to conduct regular inspections on the vehicles, and repair them in time if any abnormality is found. It not only prolongs the service life of the vehicle, but also protects its own safety.

The maintenance of semi-electric stacker is generally divided into daily maintenance and regular maintenance of mechanical, hydraulic and electrical parts.

Daily maintenance: Semi-electric stacker manufacturers believe that it should be carried out once a day. The main content is to keep the surface of the car body clean, clean the surface of the battery, and check whether the power cord is firm.

a. Mechanical maintenance: Semi-electric stacker manufacturers believe that it should be carried out every six months. The main content is to lubricate the wheel bearings and gantry bearings, and check whether the fasteners are fastened. Whether the wheels and gantry rollers rotate flexibly, and whether the fork lifts normally. The running noise of the vehicle after maintenance is not more than 70 decibels.

b. Hydraulic maintenance: Semi-electric stacker manufacturers believe that it should be carried out every six months, mainly to check whether the oil cylinder is in a normal state, whether there is internal leakage and external leakage, and hydraulic joints. , Whether the hydraulic hose is reliable and has no leakage. Whether the hydraulic oil is clean, generally replace the hydraulic oil every 12 months. Hydraulic oil adopts ISO oil standard. When the ambient temperature is -5~40℃, use HL-N46 or HL-N68, and when the ambient temperature is -35~-5℃, use HV-N46 or HV-N68 low temperature hydraulic oil. The replaced waste oil should be disposed of according to local regulations.

c. Electrical maintenance: Semi-electric stacker manufacturers believe that it should be carried out every three months. The first is to check whether the specific gravity of the battery electrolyte is appropriate [tropical areas: use a specific gravity of 1.24 (at 25°C), Other areas: adopt the specific gravity of 1.26 (at 25°C)], check whether the battery terminals are clean, otherwise the specific gravity of the electrolyte must be adjusted according to the regulations, clean the terminals, and apply a little Vaseline, and tighten them correctly. Then check whether each electrical connector is reliable, whether the switch is normal, and check whether the electrical insulation is normal (the insulation resistance of the electrical part and the vehicle body should be greater than 0.5MΩ).

The above are the methods given by the semi-electric stacker manufacturer on how to maintain and maintain the semi-electric stacker. If you have more questions, you are welcome contact us.